Related Questions

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres.
A Polythene
B PVC
C Rayon
D Polyvinyl acetate
Melt spinning of polymers involves the forcing of polymer melt through spinnerettes (fine holes) into an atmosphere kept at a temperature lower than the melting point of the polymer, which causes the fine diameter polymer melt to harden into filaments. Melt spinning is not used in case of the __________ fibres.
A Acrylic
B Polyester
C Nylon 6:6
D Polypropylene
In a linear polymer, the monomeric units are linked together to form long straight chains. The cross linked or branched chain polymers compared to linear polymers have higher
A Densities
B Melting point
C Tensile strength
D Hardness, rigidity & brittleness
While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the
A Low impact strength
B High flexibility
C Better finish and surface appearance
D High plastic deformation
The hot resistance of the bulb's filament is higher than its cold resistance because the temperature coefficient of the filament is
A Zero
B Negative
C Positive
D About 2 ohms per degree
Solution X contains 7% (by weight) of liquid M and solution Y contains 14.5% (by weight) of liquid M. If 3 grams of solution X is mixed with 2 grams of solution Y, then liquid M accounts for what percent of the weight of the resulting solution?
A 6.09%
B 10%
C 10.75%
D 21.5%
100 kg of solution A is mixed with 60 kg of solution B . If solution A has tin and copper in the ratio 1: 4 and solution B has lead and tin in the ratio 3 :2 then what is the amount of tin in the new solution?
A 70 kg
B 36 kg
C 44 kg
D 56 kg
Solution X is 10% percent alcohol by volume, and solution Y is 30 percent alcohol by volume. How many milliliters of solution Y must be added to 200 milliliters of solution X to create a solution that is 25 percent alcohol by volume?
A 600
B 800
C 300
D 250
E None of these
Dacron (or terylene) fibres as compared to nylon fibres have
A Better heat & acid resistant properties
B Poorer resistance to alkalis
C Poorer dyeability
D All of the above
Dacron (or terylene) fibres as compared to nylon's fibres have
A Better heat & acid resistant properties
B Poorer resistance to alkalis
C Poorer dyeability
D All of the above

Next steps