Related Questions

Drum X is 1/2 full of oil and drum Y, which has twice the capacity of drum X, is 2/3 full of oil. If all of the oil in drum X is poured into drum Y, then drum Y will be filled to what fraction of its capacity?
A 3/4
B 5/6
C 11/12
D 7/6
With increase in drum speed, in a rotary drum filter, the filtration rate
A Increases
B Increases linearly
C Decreases
D Is not affected
Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter.
A Filtering
B Washing
C Drying
D All of the above
Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface.
A Plane
B Curved
C Ribbed
D Either A or B
The controlling resistance in a rotary drum vacuum filter is the __________ resistance.
A Piping
B Cake
C Filter medium
D None of these
The speed of a rotary drum vacuum filter may be about __________ rpm.
A 1
B 50
C 100
D 500
Filtration capacity of a rotary drum vacuum filter depends upon the
A Cake thickness
B Characteristics of the feed slurry
C Both A & B
D Neither A nor B
Speed of the drum of the rotary vacuum filter normally ranges from __________ rpm.
A 0.1 to 2
B 5 to 7
C 3 to 8
D 8 to 15
Toggle Filter আইকনটি-i. Remove filter হিসেবে কাজ করেii. Undo filter হিসেবে কাজ করে iii. Apply filter হিসেবে কাজ করেনিচের কোনটি সঠিক?
A i ও ii
B i ও iii
C ii ও iii
D i, ii ও iii
Addition of filter aid to the slurry before filtration is done to ...... of the cake.
A Increase the porosity
B Increase the compressibility co-efficient
C Decrease the porosity
D Decrease the compressibility co-efficient

Next steps