Related Questions

The dew point of an unsaturated gas-vapor mixture does not depend upon the __________ of the mixture.
A Composition
B Temperature
C Total pressure
D All of the above
With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature)
A Increases
B Remains unchanged
C Decreases
D Decreases linearly
A vapor whose partial pressure is less than its equilibrium vapor pressure is called a __________ vapor.
A Saturated
B Supersaturated
C Superheated
D None of these
A vapor whose partial pressure is less than its equilibrium vapor pressure is called the __________ vapor.
A Saturated
B Superheated
C Unsaturated
D Dry gaseous
Dew point of a gas-vapour mixture
A Increases with temperature rise
B Decreases with temperature rise
C Decreases with decrease in pressure
D Increases with increase in pressure
Point A is 10 miles West of Point B. Point b is 30 miles North of pint C. Point C is 20 miles East of Point D. What is the distance (in miles) between Point A and Point D?
A 1010
B 1020
C 2010
D 3010
Point A is 10 km west of point B. Point B is 30 km north of point C. Point C is 20 km east of point D. What is the distance between point A and D?
A 1020Km
B 1010Km
C 2010Km
D 3010Km
A mixture contains 2/5 of element A and 3/5 of element B. When 5ml of A is added to the mixture, the proportion of B in the mixture changes to 1/5. What amount of A was originally present in the mixture before the addition was made ?
A 1ml
B 1.5ml
C 2.5ml
D 6ml
A jar contains a mixture of oil and water in the ratio 22 :3 . 50 litres of the mixture was taken out and 25 litres of water was added to it. If water was 34% in the resultant mixture, what was the initial quantity of the mixture (in litres ) in the jar?
A 175
B 150
C 75
D 125
Ponchon Savarit method is based on the use of enthalpy concentration diagram, which contains the bubble point curve (saturated liquid curve), dew point curve (saturated vapour curve) and equilibrium tie lines. As compared to McCabe-Thiele's method, this method
A Is more accurate in finding the number of equilibrium stages
B Accounts for the enthalpy changes in the process
C Facilitates direct calculation of heat load on reboiler & condenser from, the diagram used in this method
D All of the above

Next steps