Related Questions

Ceramic coating material for furnace refractory, which increases its emissivity and thus the radiation heat transfer rate in the furnace, comprises of
A Graphite powder
B Thoria
C Zircon powder
D Beryllium
The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace.
A Arc
B Resistance
C Low frequency induction
D High frequency induction
An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace.
A Resistance
B Arc
C Low frequency induction
D None of these
Extended heat transfer surface like fins are used to increase the heat transfer rate. Fin efficiency is defined as the ratio of heat transferred across the fin surface to the theoretical heat transfer across an equal area held at the
A Surrounding temperature
B Average temperature of the fin
C Temperature of the fin end
D Constant temperature equal to that of the base
Which furnace employs an I.D. fan for the removal of flue gases from the furnace?
A Coke oven
B Blast furnace stoves
C Beehive coke oven
D High pressure boiler
Black smoke coming out of the chimney of a furnace is an indication of the use of __________ in the furnace.
A Low amount of excess combustion air
B Large quantity of excess combustion air
C Hydrocarbon fuel
D Pulverised coal as fuel
An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace.
A Walking beam
B Shaft
C Tunnel
D Rotary hearth
__________ furnace is not an electric furnace.
A Arc
B Induction
C Pot
D Resistance
Higher furnace temperature can not be achieved by use of a lean fuel gas in the furnace by
A Increasing the draft in the furnace
B Preheating the fuel gas
C Oxygen enrichment of combustion air
D Preheating the combustion air
Operation of blast furnace stove is based on the principles of a __________ furnace.
A Regenerative
B Recuperative
C Both A and B
D Neither A nor B

Next steps