Related Questions

একটি পানিপূর্ণ কুয়ার গভীরতা 20m ও ব্যাস 2 m. কুয়াটিকে পানি শূণ্য করার জন্য 5 HP এর একটি পাম্প লাগানো হল। অর্ধেক পানি তোলার পর পাম্পটি নষ্ট হয়ে গেল। বাকি পানি তোলার জন্য একই ক্ষমতা সম্পন্ন আর একটি পাম্প লাগানো হল। প্রথম পাম্প দ্বারা সম্পাদিত কাজের পরিমান নির্ণয় কর।(The depth and diameter of a water filled well are 20 m and 2 m respectively. An engine of 5 HP is attached to pump out the water. The pump was ruined after emptying half of the water. Then another pump of same capacity was attached to pump out rest of the water. Determine the work done by first pump.) 
A 2.54 × 104 J
B 1.44 × 104 J
C 2.34×104 J
D 1.54 × 104 J
E 1.54 ×104 J
A centrifugal pump designed to pump water is employed to pump a more viscous oil. In the later case, the pump
A Develops a lower head
B Capacity is reduced
C Requires more power
D All of the above
Working alone, pump A can empty a pool in 3 hours. Working alone, pump B can empty the same pool in 2 hours. Working together, how many minutes will it take pump A and pump B to empty the pool?
A 72
B 75
C 84
D 96
A boat has a crack in its bull which is leaking water into the boat and could pump which can pump the water out in 8 hours . If the boat is 168 km away from the shore and the pump is running what is the minimum speed the boat should run at so that it can reach the shore before sinking?
A 5km./hour
B 6 km/hour
C 7 km/hour
D 8km/hour
A swimming pool is initially filled to a depth of 96 inches. After 2 weeks, the depth has decreased to9212 inches. Assuming that the depth decreased at a constant rate, after how many days would the water depth have reached 9334 inches?
A 3
B 9
C 7
D 6
Centrifugal pump can't be used to pump
A Molten sodium (used as a coolant in Fast Breeder Reactor)
B Moderately viscous vegetable oil used in soap industry
C Thick molten soap at 80°C
D None of the above
Centrifugal pump made of pyrex or glass can't be used to pump
A Milk and fruit juices
B Alkaline solutions
C Dilute H2SO4 at room temperature
D Brine
Which is the correct relationship for a centrifugal pump? (where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm)
A D = 1840 H0.5/N
B D = 1840 N/H0.5
C H = 1840 D0.5/N
D D = 1840 H/N
Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases.
A NPSH required
B BHP required by the pump
C Head of the liquid pumped
D All of the above
A centrifugal pump is called a turbine pump, if it is having a
A Turbine type impeller
B Vaned diffusion casing
C Rotating vaned volute
D None of these

Next steps