Bissoy.com
Doctors Medicines MCQs Q&A

For an oscillator to properly start, the gain around the feedback loop must initially be

For an oscillator to properly start, the gain around the feedback loop must initially be Correct Answer Greater than 1

In order for an oscillator to start and sustain oscillations, the gain around the feedback loop must meet specific criteria. The criteria for proper oscillation are as follows:

The gain around the feedback loop must be equal to or greater than 1.

This means that the gain should be sufficient to compensate for the losses in the feedback loop, so the signal can build up and sustain itself in an oscillatory manner.

Therefore, the correct answer is:

Option B: Greater than 1

Related Questions

Consider the following statements with respect to the feedback from the control systems: 1. The feedback can improve stability or be harmful to stability if it is not properly applied. 2. The feedback can always improve stability. 3. In many situations, the feedback can reduce the effect of noise and disturbance on system performance. 4. In general, the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located. Select the correct statements.
Consider the following statements with respect to the feedback of the control systems. i. Feedback can improve stability or be harmful to stability if it is not properly applied. ii. Feedback can always improve stability iii. In many situations the feedback can reduce the effect of noise and disturbance on system performance. iv. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the following statements with respect to the feedback of the control systems: 1. Feedback can improve stability or be harmful to stability if it is not properly applied. 2. Feedback can always improve stability 3. In many situations the feedback can reduce the effect of noise and disturbance on system performance. 4. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
A certain inverting amplifier has a closed-loop voltage gain of 25. The OP-amp has an open-loop voltage gain of 100,000. If an OP-amp with an open-loop voltage gain of 200,000 is substituted in the arrangement, the closed-loop gain
Consider the following statements related to oscillator circuits : 1. The tank circuit of a Hartley oscillator is made up of a tapped capacitor and a common inductor. 2. The tank circuit of a Colpitts oscillator is made up of a tapped capacitor and a common oscillator. 3. The Wien Bridge oscillator is essentially a two-stage amplifier with an RC bridge in the first stage, and, the second stage serving as an inverter. 4. Crystal oscillators are fixed frequency oscillators with a high Q-factor.  Which of the following are true?
Write the formula for closed loop voltage gain of inverting amplifier with feedback using open loop voltage gain and gain of feedback circuit.
Consider a conducting loop of radius a and total loop resistance R placed in a region with a magnetic field B thereby enclosing a flux $${\phi _0}$$ . The loop is connected to an electronic circuit as shown, the capacitor being initially uncharged.
Electromagnetic Theory mcq question image
If the loop is pulled out of the region of the magnetic field at a constant speed u, the final output voltage Vout is independent of
A system has a gain of 80 db without feedback, if the negative feedback is 1/50th. What is the closed loop gain of the system in db with the addition of the negative feedback?
Express closed loop voltage gain (AF) in terms of open loop gain (A) and feedback circuit gain (B)?
An internally compensated op amp has a dc open-loop gain of 106 V/V and an AC open-loop gain of 40 dB at 10 kHz. Estimate its gain–bandwidth product and its expected gain at 1 kHz.