Related Questions

Consider a binary digital communication system with equally likely 0's and 1's. When binary 0 is transmitted the detector input can lie between the levels -0.25V and +0.25V with equal probability: when binary 1 is transmitted, the voltage at the detector can have any value between 0 and 1 V with equal probability. If the detector has a threshold of 0.2 V (i.e., if the received signal is greater than 0.2 V, the bit is taken as 1), the average bit error probability is
Directions : In each of the following questions a statement is given, followed by two conclusions. Give answer :

Statement : Of all the radio sets manufactured in India, the 'X' brand has the largest sale.

Assumptions :
I. The sale of all the radio sets manufactured in India is known.
II. The manufacturing of no other radio set in India is as large as 'X' brand radio.
For a diode the transition capacitance was 15pF. The diode is replaced with another diode of same material with twice cross sectional area. Terminal voltage remains unchanged. The capacitance of new diode is __________
Find the current Ix if the voltage across the diode is 0.5V. The reverse saturation current of diode 10-11A, the cut-in voltage of diode is 0.6V. Assume that the temperature at which diode operates is 25°C. The resistance R1=2KΩ.
From the given circuit diagram, considering the diode to be a silicon semiconductor diode, what is the magnitude of diode current? (Use an appropriate model of the diode)
The household radio receiver uses __________ detector.
An AM receiver uses a diode detector for demodulation. This enables it satisfactorily to receive
A receiver is operated at a temperature of 300 K. The transistor used in the receiver have an average output resistance of 1 k. The Johnson noise voltage for a receiver with a bandwidth of 200 kHz is
In a receiver, if the noise figure of the mixer stage in the receiver is 7 dB, then the equivalent noise temperature is given that the receiver is operating at 290 K:
The sender asks the receiver what is to be sent to him (the receiver). He also takes care of the aspirations of the receiver while he designs and transmits the message. This is the chief guiding tenet of the