Related Questions

If cathode and anode connections in a mercury arc rectifier are inter changed
A The rectifier will not operate
B Internal losses will be reduced
C Both ion and electron streams will move in the same direction
D The rectifier will operate at reduced efficiency
The voltage drop between the anode and cathode, of a mercury arc rectifier comprises of the following
A anode drop and cathode drop
B anode drop and arc drop
C cathode drop and arc drop
D anode drop, cathode drop and arc drop
In mercury arc rectifiers having grid, the arc can be struck between anode and cathode only when the grid attains a certain potential, this potential being known as
A maximum grid voltage
B critical grid voltage
C any of the above
D none of the above
The potential drop in the arc, in a mercury arc rectifier, varies
A 0.05 V to 0.2 V per cm length of the arc
B 0.5 V to 1.5 V per cm length of the arc
C 2 V to 3.5 V per cm length of the arc
D none of the above
তড়িৎ রাসায়নিক কোষের emf = ?i. E° Anode(ox) + E°Cathode (Red) 11. E Cathode(Red) - E°Anode (Red) 111. E° Anode(ox) - E°Cathode (Red) নিচের কোনটি সঠিক?
A i ও ii
B i ও iii
C ii ও iii
D i, ii ও iii
If a gas metal arc process uses a low arc voltage and the arc is continuously interrupted as the molten electrode metal fills up the arc gap is known as
A ARC
B Short ARC
C ARC length
D ARC blow
Caustic soda is produced in a mercury cell having anode and cathode made respectively of moving mercury and
A Moving mercury and graphite
B Graphite and moving mercury
C Moving mercury and carbon
D Moving mercury and crimped steel wire
Mercury, in arc rectifiers, is chosen for cathode because
A Its ionization potential is relatively low
B Its atomic weight is quite high
C Its boiling point and specific heat are low
D All of the above
In a grid control of mercury arc rectifiers when the grid is made positive relative to cathode, then it the electrons on their may to anode.
A accelerates
B decelerates
C any of the above
D none of the above
In a mercury arc rectifier______ flow from anode to cathode
A ions
B electrons
C ions and electrons
D any of the above

Next steps