Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

For a Zener diode shunt regulator, the source current is IS, the Zener diode current is IZ and the load current is IL. The source voltage is VS, Zener voltage is VZ and load voltage is VL. The load resistance is RL. What is the correct option for the safe operation of the diode?
In the Zener controlled series regulator shown below, find the current through the Zener diode. Given that the Zener diode breakdown voltage is 5V, the source voltage is 15V, the output voltage is 10V, R4 = 2kΩ, β=99, R1=2kΩ.
What is/are the following differences between private and public limited companies?
1. In a private limited company there is restriction on the number of members, where as no such restriction is applicable on a public limited company.
2. A private limited company can be listed on a stock exchange, where as a public limited company is always listed on a stock exchange.
3. A private limited company cannot issue debentures, whereas a public limited company can issue debentures.
For the zener diode shown in the figure, the zener voltage at knee is 7V, the knee current is negligible and the zener dynamic resistance is 10Ω. If the input voltage (Vi) ranges from 10 to 16 volts, the output voltage (Vo) ranges from?
A Zener regulator has to handle supply voltage variation from 19.5V to 22.5V. Find the magnitude of regulating resistance, if the load resistance is 6KΩ. The Zener diode has the following specifications: breakdown voltage =18V, (IZ)Min=2µA, maximum power dissipation=60mW and Zener resistance =20Ω.
A basic op-amp circuit has a zener and rectifier diode connected in the feedback path. Calculate the maximum positive voltage. Where, zener voltage = 5.1 v and voltage drop across the forward biased zener = 0.7v?
Partial specifications of a Zener diode is provided. VZ = 10.0 V, VZK = 9.6 V, and IZT = 50 mA. Assuming that the power rating of a breakdown diode is established at about twice the specified Zener current (IZT), what is the power rating of each of the diodes described above?
Determine the maximum and minimum values of load current for which the Zener diode shunt regulator will maintain regulation when VIN=24V and R=500Ω. The Zener diode has a VZ=12V and (IZ)MAX=90mA.
An unloaded zener regulator has a source voltage of 20 V, a series resistance of 330 W, and a zener voltage of 12 V, What is the Zener current?
The zener diode in the circuit has a zener voltage of 5.8V and knee current of 0.5mA. The maximum load current drawn with proper function over input voltage range between 20 and 30V is?