Related Questions

A Windows 2000 Server computer named server2 runs numerous 32bit applications and two 16bit applications. Users start the 16bit applications by running APP1.EXE for one application and APP2.EXE for another application. The 16bit applications are configured to run in the separate memory space. You want to create a performance base like chart in the system monitor for all the applications on server2. You add all of 32bit applications and now you want to add two 16bit applications. What should you do?
Why is the three phase reluctance motor preferred over single phase reluctance motor?
Directions : In each of the following questions a statement is given, followed by two conclusions. Give answer :

Statements : Applications of applicants who do no fulfil eligibility criteria and/or who do not submit applications before last date will be summarily rejected and will not be called for the written test.

Conclusions :
I. Those who are called for the written test are those who fulfil eligibility criteria and have submitted their applications before last date.
II. Written test will be held only after scrutiny of applications.
The reluctance offered to the stator flux by two very large air gaps in series with high permeability iron, in reluctance machine is maximum, when the space angle θr = ___________
The reluctance offered to the stator flux by two small air gaps in series with high permeability iron, in reluctance machine is minimum, when the space angle θr = ___________
A 3 Phase 400, 100 MVA alternator is connected to infinite bus bar. If the mechanical power input is more than the maximum reluctance power, the reluctance generator will lose synchronizm if ____________
For which of the following applications a D.C. motor is preferred over an A.C. motor?
In case of a reluctance motor, when the load is increased so that it cannot maintain synchronous speed the motor will
How is the reluctance motor with respect to a synchronous motor and are the field windings?
A centrifugal pump which circulates a hot liquid metal at 500 degree Celsius is driven by a 3600 rpm electric motor. The motor is coupled to the pump impeller by a horizontal steel shaft of dia 25 mm. Let us assume the motor temperature as 60 degree Celsius with the ambient air at 25 degree Celsius, what length of shaft should be specified between the motor and the pump? It may be presumed that the thermal conductivity of the shaft material is 35W/m K and that the convective film coefficient between the steel shaft and the ambient air is 15.7W/square m K