In a shaded pole motor, the shading coil usually consist of

In a shaded pole motor, the shading coil usually consist of Correct Answer a single turn of heavy copper wire which is short-circuited and carries only induced current

Bissoy MCQ

Related Questions

একটি স্টেপ আপ ট্রান্সফরমারে, গৌণ কুণ্ডলীর পাকসংখ্যা মুখ্য কুন্ডলীর পাকসংখ্যার দ্বিগুণ। যদি মূখ্য কুন্ডলীকে কোন পরিবর্তী বিদ্যুৎ লাইনের সাথে সংযুক্ত করা হয়, তাহলে মুখ্য কুণ্ডলীর তুলনায় গৌণ কুণ্ডলীতে- (In a step up transformer, the number of turns in the secondary coil is twice to that of primary coil. If you apply an alternating current in the primary coil, then in the secondary coil compared to the primary coil-)
In an iron cored coil the iron core is removed so that the coil becomes an air cored coil. The inductance of the coil will
A certain amount of current flows through a ring shaped coil with fixed number of turns. How does the magnetic induction B varies inside the coil if an iron core is threaded into coil without dimensional change of coil?
Adithya peddles a stationary bicycle the pedals of which are attached to a 500 turn coil of area 11 m2. The coil rotates at half a revolution per second and it is placed in a uniform magnetic field of 20.5 T perpendicular to the axis of rotation of the coil. What is the maximum voltage generated in the coil?
In a machine with coil span 9, if a coil has its one coil-side in slot 1, then its other coil-side must be in ____________
A large circular coil of N turns and radius R carries a time varying current $$I = {I_0}\sin \left( {\omega t} \right).$$   A small circular coil of n turns and radius r(r ≪ R) is placed at the centre of the large coil such that the coils are concentric and coplanar. The induced emf in the small coil
What is the average coil emf generated in a 4-pole DC machine having flux/pole equal to 0.1 wb rotating at 1500 rpm? (No. of coil sides = 100)
In case of a shaded pole motor the direction of rotation of the motor is
A 4-pole Dc wound machine is lap wound with 400 conductors. The pole shore is 20 cm long and average flux density over one-pole pitch is 0.4 T, the armature diameter being 30 cm. What is the value of flux/pole?
Calculate the number of conductors on each pole piece required in a compensating winding for a 6-pole lap-wound dc armature containing 286 conductors. The compensating winding carries full armature current. Assume ratio of pole arc/ pole pitch = 0.7.