Related Questions

In leaf springs, the maximum bending stress developed in the plates is (where W = Load acting on the spring, $$l$$ = Span of the spring, n = Number of plates, b = Width of plates and t = Thickness of plates)
A $$\frac{{{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
B $$\frac{{3{\text{W}}l}}{{2{\text{nb}}{{\text{t}}^2}}}$$
C $$\frac{{2{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
D $$\frac{{3{\text{W}}l}}{{{\text{nb}}{{\text{t}}^2}}}$$
Following will occur if level of electrolyte falls below plates
A capacity of the cell is reduced
B life of the cell is reduced
C open plates are converted to lead sulphate
D all above
When the lead-acid cell is fully charged, the electrolyte assumes _____ appearance
A dull
B reddish
C bright
D milky
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as ________ double cover butt joint.
A Single riveted
B Double riveted
C Multi riveted
D None of these
When two plates are butt together and riveted with cover plates with two rows of rivets, the joint is known as
A Lap joint
B Butt joint
C Single riveted single cover butt joint
D Double riveted double cover butt joint
When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as _______ double cover butt joint.
A Single riveted
B Double riveted
C Both (A) and (B)
D None of these
Electrolyte used in a lead-acid cell is
A NaOH
B Only H2SO4
C Only water
D Dilute H2SO4
Specific gravity of electrolyte in Edison cell is
A 0.8
B 0.95
C 1.1
D 1.21
During the idle period of the battery, strong electrolyte tends to change the active material of the cell into
A PbO2
B PbSC4
C PbO
D Pb
Electrolyte used in an Edison cell is
A NaOH
B KOH
C HCl
D HNO3

Next steps