Bissoy.com
Doctors Medicines MCQs Q&A

An ammeter has a resistance of G ohms and range of I amperes. The value of resistance required in parallel to convert it into an ammeter of range nI is ___________.

An ammeter has a resistance of G ohms and range of I amperes. The value of resistance required in parallel to convert it into an ammeter of range nI is ___________. Correct Answer $$\frac{{\text{G}}}{{{\text{n}} - 1}}$$

Related Questions

A resistance R is measured using the connection shown in the below figure. The current measured is 10 A on ranges 100A and the voltage measured is 125 V on 150 V range. The scales of the ammeter and voltmeter are uniform. The total number of scale divisions of the ammeter is 100 and that of the voltmeter is 150. The scale division can be distinguished. The constructional error of the ammeter is ± 0.3% and that of voltmeter±0.4%. The resistance of the ammeter is 0.25 Ω. The possible error in the measurement of R is?
A voltmeter has a resistance of G ohms and range V volts. The value of resistance required in series to convert it into voltmeter of range nV is ___________.
A current of 16 amperes divides between two branches in parallel of resistances 8 ohms and 12 ohms respectively The current in each branch is
A current of 16 amperes divides between two branches in parallel of resistances 8 ohms and 12 ohms respectively. The current in each branch is
Three resistances of 15 ohms, 10 ohms and 30 ohms are connected in a parallel combination, then What is its equivalent resistance ?
Three resistances of 10 ohms, 15 ohms and 30 ohms are connected in parallel.
The total resistance of the combination is
A galvanometer of internal resistance 5 Ω has range 2 amps. In order to convert it into an ammeter of range 10 amps, how much shunt resistance is required?
The resistance of a parallel circuit consisting of two branches is 12 ohms. If the resistance of one branch is 18 ohms, what is the resistance of the other?
Which Statements is / are correct ? A. An ammeter is connected in series in a circuit and a voltmeter is connected in Parallel. B. An ammeter has a high resistance C. A voltmeter has a low resistance
Refer the diagram; a single-phase supply of 100V, 50Hz is fed to the step-up transformer having primary impedance of 1 ohms and secondary impedance 20 ohms. What is the power consumed by the load of 5 ohms?