Related Questions

The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
There is always some steam left in the clearance space from the previous stroke. This steam left in the clearance space is called
A Wet steam
B Saturated steam
C Superheated steam
D Cushion steam
There are two domains on your network. The DESIGN domain trusts the SALES domain. A color printer is shared in the DESIGN domain, and print permissions have been granted to the Domain Users and Domain Guests groups in the DESIGN domain. The Guest account has been enabled in the DESIGN domain. User John Y logs on using his account in the SALES domain. What must you do to allow JohnY to access the printer?
A Make JohnY a member of the DESIGN Domain Guests group
B Make JohnY a member of the DESIGN Domain Users group
C Do nothing. JohnY can access the printer now
D JohnY cannot access the printer with this configuration
E None of the above
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
A Remains within the flange
B Remains below the slab
C Coincides the geometrical centre of the beam
D None of these
A ship leaves port and sails 6 miles west. It then sails 6 miles south ;and then 6 miles west again. Approximately how many miles is the ship from port?
A 9
B 11
C 13
D 15

Next steps