Related Questions

The difference between isothermal compressibility and adiabatic compressibility for an ideal gas is
A 0
B +ve
C -ve
D ∞
What is the ratio of adiabatic compressibility to isothermal compressibility?
A 1
B > 1
C >> 1
Compressibility factor of a real gas is the ratio of the actual volume to that predicted by ideal gas law. As the pressure of the gas approaches zero, the compressibility factor approaches
A ∞
B 0
C 1
D 0.24
Compressibility of sandy soils is
A almost equal to that of clayey soils
B much greater than that of clayey soils
C much less than that of clayey soils
D none of the above
For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as
A dry of OMC and wet of OMC
B wet of OMC and dry of OMC
C wet of OMC and wet of OMC
D dry of OMC and dry of OMC where OMC is optimum moisture content
In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to
A Increase the depth of foundation
B Drain the soil
C Compact the soil
D Replace the poor soil
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. How many meters of low-quality cloth is consumed?
A 40,00 m
B 60,000 m
C 46,500 m
D 22,500 m
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. What is the ratio of low quality dye used for C-type shirts to that used for D-type shirts ?
A 2:3
B 1:2
C 2:1
D 3:2
With an RS latch a high S and low R sets the output to _____ ; a low S and a high R _____ the output to low.
A No change, set
B Race, high
C high, reset
D set, reset
E None of the above
The value of the coefficient of compressibility for water at ordinary pressure and temperature in kg/cm is equal to
A 2,100
B 2,700
C 10,000
D 21,000

Next steps