If flying height of a spacecraft is H, the length of air base is B and the parallax difference between two points is dp, then the difference in height

If flying height of a spacecraft is H, the length of air base is B and the parallax difference between two points is dp, then the difference in height Correct Answer $${\text{h}} = \frac{{{\text{dp}}}}{{\frac{{\text{B}}}{{\text{H}}}}}$$

Bissoy MCQ

Related Questions

The difference of height of two points whose parallax difference is 0.8 mm on a pair of stereo pair taken from a height ‘H’ is 100 m. If mean photo base is 95.2 mm, the flying height is
23 cm × 23 cm photographs are taken from a flying height with a camera of focal length of 3600 m and 15.23 cm respectively. A parallax difference of 0.01 mm represents
The parallax equation $$\Delta {\text{p}} = \frac{{{\text{Bm}}\Delta {\text{h}}}}{{{\text{H}} - {\text{h}}}}$$   is applicable to entire overlap of the photographs only if parallax is measured
The relation between the air base (B), photographic base (b), flying height (H) and the focal length (f) of a vertical photograph, is 
interface Base{ boolean m1 (); byte m2(short s);}

which two code fragments will compile?
1. interface Base2 implements Base {}2. abstract class Class2 extends Base { public boolean m1(){ return true; }}3. abstract class Class2 implements Base {}4. abstract class Class2 implements Base { public boolean m1(){ return (7 > 4); }}5. abstract class Class2 implements Base { protected boolean m1(){ return (5 > 7) }}
A plane flying north at 500 mph passes over a city at 12 noon. A plane flying east at the same altitude passes over the same city at 12.30 pm. The plane is flying east at 400 mph. To the nearest hundred miles, how far apart are the two planes at 2 pm ?
$$\alpha $$ and $$\beta $$ are the angles subtended by a point of elevation h at their air station with respective plumb points. Photo scale and focal length of the lens being ‘S’ and ‘f’ respectively. Parallax displacement of the point due to relief, is
An airplane is flying at a certain height. It makes an angle of depression of 45 degree to the landing spot with horizontal distance between the two being 1100 m. What is the vertical height at which the plane is flying?
Two circular dials of exactly the same size are mounted on a wall side by side in such a way that their perimeters touch at one point. Dial 1, which is on the left , spins clockwise around its center , and dial 2 , which is on the right spins counter clockwise around its center . (Assume that there is no friction at the point of contact between the dials.) Each dial is marked on its perimeter at three points that are at equale distances around the points arked ondial 1 are N, O, and P and the points marked on dial 2 are X, Y, and Z. If points O and Z are just meeting at the point of contact between the dials , and if dial 1 spins at the same speed as dial 2, what is the smallest number of revolutions of each dial that will bring O and Z together again?
Select the correct differences between char and varchar data types? i. varchar is non unicode and char is unicode character data type ii. char is ‘n’ bytes whereas varchar is actual length in bytes of data entered in terms of storage size iii. varchar is variable in length and char is the fixed length string iv. For varchar, if a string is less than the maximum length then it is stored in verbatim without any extra characters while for char if a string is less than the set length it is padded with extra characters to equalize its length to given length