Related Questions

In drilling softer materials, the cutting speed is ___________ as compared to harder materials.
A Same
B Low
C High
D None of these
In order to ram the sand harder at the back of the mould and softer on the pattern face, a ________ is used.
A Sand slinger
B Squeezing machine
C Jolt machine
D Stripper plate machine
If the material of the base of the Casagrande liquid limit device on which the cup containing soil paste drops is softer than the standard hard rubber, then
A The liquid limit of soil always increases
B The liquid limit of soil always decreases
C The liquid limit of soil may increase
D The liquid limit of soil may decrease
A drill mainly used in drilling brass, copper or softer materials, is
A Flat drill
B Straight fluted drill
C Parallel shank twist drill
D Tapered shank twist drill
For softer materials, the point angle of the drill is kept
A Equal to 118°
B Less than 118°
C More than 118°
D Any one of these
For grinding of softer materials, the grinding wheel should have __________ grain size.
A Finer
B Coarser
C Medium
D Any type of
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2

Next steps