Related Questions

When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies
A Less than the left half span
B Whole of left half span
C More than the left half span
D Whole span
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A $$\frac{2}{3}$$
B $$\frac{3}{2}$$
C $$\frac{5}{8}$$
D $$\frac{8}{5}$$
A man sells chocolates which are in the boxes. Only either full box or half a box of chocolates can be purchased from him. A customer comes and buys half the number of boxes which the seller had plus half box more. A second customer comes and purchases half the remaining number of boxes plus half a box. After this the seller is left with no chocolate boxes. How many chocolate boxes the seller had initially?
A 2
B 3
C 4
D 3.5
E None of these
One of the diagonal of a rhombus is 70% of the other diagonal. What is the ratio of area of rhombus to the square of the length of the larger diagonal?
A 3 : 10
B 3 : 20
C 7 : 20
D 7 : 10
An empty fuel tank of a car was filled with A type petrol. When the tank was half-empty, it was filled with B type petrol. Again when the tank was half-empty, it was filled with A type petrol. When the tank was half-empty again, it was filled with B type petrol. What is the percentage of A type petrol at present in the tank?
A 33.5%
B 37.5%
C 40%
D 50%
An empty fuel tank of a car was filled with A type petrol. When the tank was half-empty, it was filled with B type petrol. Again when the tank was half-empty, it was filled with A type petrol. When the tank was half-empty again, it was filled with B type petrol. What is the percentage of A type petrol at present in the tank ?
A 33.5%
B 37.5%
C 40%
D 50%
A train 150 m long crosses a milestone is 15 seconds and crosses another train of the same lengh travelling in the opposite direction in 12 seconds. The speed of the second train in km/hr is.
A 52
B 56
C 54
D 58
A truss containing j joints and m members, will be a simple truss if
A m = 2j - 3
B j = 2m - 3
C m = 3j - 2
D j = 3m - 2
To minimize the total cost of a roof truss, the ratio of the cost of truss to the cost of purlins shall be
A 1
B 2
C 3
D 4
If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than
A $$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$
B $$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} + \frac{{2{\text{D}}}}{3}} \right)^2}$$
C $$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$
D $$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{\text{D}}}{3}} \right)^2}$$

Next steps