Related Questions

The slenderness ratio of lacing bars should not exceed
A 100
B 120
C 145
D 180
Angle of inclination of the lacing bar with the longitudinal axis of the column should preferably be between
A 10° to 30°
B 30° to 40°
C 40° to 70°
D 90°
Lacing bars in a steel column should be designed to resist
A Bending moment due to 2.5% of the column load
B Shear force due to 2.5% of the column load
C 2.5% of the column load
D Both (A) and (B)
In triangle PQR length of the side QR is less than twice the length of the side PQ by 2 cm. Length of the side PR exceeds the length of the side PQ by 10 cm. The perimeter is 40 cm. the length of the smallest side of the triangle PQR is:
A 6 cm
B 8 cm
C 9 cm
D 10 cm
With a uniform speed , a car covers a distance in 8 hours . Had the same distance could have been increased by 4 km/hr. The same distance could have been covered in 7 hours and 30 minutes. What is the distance covered?
A 420 km
B 480 km
C 520 km
D 640 km
A board of length L feet is cut into two pieces such that the length of one piece is 1 foot more than twice the length of the other piece. Which of the following is the length, in feet, of the longer piece?
A (2L+1)/2
B (L-1)/3
C (2L+3)/3
D (2L+1)/3
Effective length of a runway is the distance between
A Ends of the runway
B Point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
C Point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
D Ends of the clear way on either side
"Many " opinions have been "voiced" on the likely "effective " of the effective.
A Many
B voiced
C effective
D effective
A person has to cover a distance of 6 km in 45 minutes. If he covers one-half of the distance in two-thirds of the total time; to cover the remaining distance in the remaining time , his speed (in km/hr ) must be :
A 6
B 8
C 12
D 15
The distance from point P to point Q is 20 miles, and the distance from point P to point R is 12 miles. If d is the distance, in miles, between points Q and R , then the range of possible values for d is indicated by __
A 8≤d ≤20
B 8≤d ≤32
C 12≤d ≤32
D 12≤d≤32

Next steps