Related Questions

Other parameters remaining same, the recrystallisation temperature of an alloy is lowered, when
A Strain rate is increased
B Grain size is increased
C Prior cold deformation is increased
D Not affected by any of the above parameters
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2
The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel.
A Carbon
B Manganese
C Both A & B
D Neither A nor B
If you need 98 ounces of iron and 2 ounces of carbon to make a sheet of steel. How much iron you need in ounces to make 12 sheet steel?
A 98
B 50
C 49
D 198
In which beam tension capacity of steel is greater than combined compression capacity of steel and concrete?
A Over-reinforced
B Under-reinforced
C Singly reinforced
D Doubly reinforced
For machining a mild steel workpiece by a high speed steel tool, the average cutting speed is
A 5 m/min
B 10 m/ min
C 15 m/min
D 30 m/min
These plans, made by the steel fabricator, are assembly drawings for the steel structure:
A Welding plans
B Assembly plans
C Construction plans
D Erection plans

Next steps