Which of the following operations can be performed with milling cutters?

A Cutting key ways on shafts
B Cutting external screw threads
C Cutting teeth of spur gears
D All of these

Correct Answer: All of these

In this operation, surfaces which are at an angle to the axis of the cutter, is machined by the rotary cutter. -Milling machine can perform all other common operations like turning, facing, fillet making, chamfering, drilling, gear cutting, planning, slot cutting.
Bissoy MCQ
#Mechanical Engineering #Manufacturing And Production Technology

Related Questions

In a milling operation, two side milling cutters are mounted with a desired distance between them so that both sides of a workpiece can be milled simultaneously. This set up is called
A Gang milling
B Straddle milling
C String milling
D Side milling
A set of eight form relieved milling cutters for each module is provided to enable cutting of gears of different
A Materials
B Types of gears
C Number of teeth
D Width of gears
Chemical milling operation is performed
A On universal milling machine
B On plain milling machine
C In a tank containing an etching solution
D Any one of these
Cutting and forming operations can be performed in a single operation in a
A Simple die
B Progressive die
C Compound die
D Combination die
Blanking and piercing operations can be performed simultaneously in a
A Simple die
B Progressive die
C Compound die
D Combination die
Which of the following summation operations is performed on the bits to check an error-detecting code?
A Codec
B Coder-decoder
C Checksum
D Attenuation
E Broadband and baseband refer to the different frequencies at which infrared operates then transmitting signals in certain conditions
The basic operations performed by a computer are
A Arithmetic operation
B Logical operation
C Storage and relative
D All of them
In a ________, two or more operations are performed simultaneously at the single stroke of the ram.
A Simple die
B Progressive die
C Combination die
D Compound die
In a ________, both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram.
A Simple die
B Progressive die
C Combination die
D Compound die
Who defined Operations Research as scientific method of providing executive departments with a quantitative basis for decisions regarding the operations under their control?
A Morse and Kimball (1946)
B P.M.S. Blackett (1948)
C E.L. Arnoff and M.J. Netzorg
D None of the above

Next steps