Related Questions

The flow in which each liquid particle has a definite path and their paths do not cross each other is called
A One dimensional flow
B Streamline flow
C Steady flow
D Turbulent flow
A particle dropped from the top of a tower uniformly falls on ground at a distance which is equal to the height of tower. Which of the following paths will be traversed by the particle ?
A Circle
B Parabolic
C Great circle
D Hyper–parabolic
Key concept under which technique are network of events and activities , resource allocation, time and cost considerations, network paths and critical paths ?
A Game Theory
B Network Analysis
C Decision Theory
D None of the above
Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity?
A Sphere
B Cube
C Cylinder (L/D = 1)
D Raschig rings
When the addenda on pinion and wheel is such that the path of approach and path of recess are half of their maximum possible values, then the length of the path of contact is given by (where r = Pitch circle radius of pinion, R = Pitch circle radius of wheel and $$\varphi $$ = Pressure angle)
A $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\cos \varphi }}{2}$$
B $$\frac{{\left( {{{\text{r}}^2} + {{\text{R}}^2}} \right)\sin \varphi }}{2}$$
C $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\cos \varphi }}{2}$$
D $$\frac{{\left( {{\text{r}} + {\text{R}}} \right)\sin \varphi }}{2}$$
The process of heat transfer from one particle of the fluid to another by the actual movement of the fluid particles due to difference of density caused by temperature of the particle is known as
A Conduction
B Free convection
C Forced convection
D Radiation
For the non catalytic reaction of particles with surrounding fluid, the same needed to achive the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance.
A Film diffusion
B Diffusion through ash layer
C Chemical reaction
D Either A, B or C
For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance.
A Film diffusion
B Diffusion through ash layer
C Chemical reaction
D Either A, B or C
Two beams, one of circular cross-section and the other of square cross-section, have equal areas of cross-sections. When these beams are subjected to bending,
A Both beams are equally economical
B Square beam is more economical
C Circular beam is more economical
D None of these
LMTD correction factor which is to be applied for a cross-flow heat exchanger increases with increase in the number of shell passes. Its value for a single pass cross flow heat exchanger is
A 0
B 1
C >1

Next steps