Related Questions

When the belt is stationary, it is subjected to some tension known as initial tension. The value of this tension is equal to the
A tension in the tight side of the belt
B tension in the slack side of the belt
C sum of the tensions on the tight side and slack side of the belt
D average tension of the tight side and slack side of the belt
The electricity bill of a certain establishment is partially fixed and partially varies as the number of units of electricity consumed. Wen in a certain month 540 units are sonsumed. the bill is TK 1800. In another month 620 units are consumed are the bill is Tk 2040. Inayet another month if 500 units are consumed what would be the bill (in Tk) for that month?
A 1950
B 1560
C 1840
D 1680
Units of surface tension are
A energy/unit area
B distance
C both of the above
D it has no units
If machine A polishes x units in 12 minutes and machine B polishes 5x units in 40 minutes, in how many minutes will A and B. working together, polish 50x units?
A 240
B 300
C 350
D 120
দুইটি বিপরীতমুখী বলদ্বয়ের লব্ধি 12 units এবং বলদ্বয় হতে যথাক্রমে 3 units এবং 4 units দূরে ক্রিয়াশীল। বলদ্বয়ের মান কত?
A 48 and 36 units
B 48 and 48 units
C 40 and 36 units
D 40 and 40 units
A machine can produce 10 units in 5 hours. Another machine can produce 5 units in 10 hours. Working together, how many units can they produce in 30 hours?
A 50 units
B 60 units
C 70 units
D 80 units
The power transmitted by a belt is maximum when the maximum tension in the belt is _________ of centrifugal tension.
A One-third
B Two-third
C Double
D Three times
The tension on the slack side of the belt is __________ the tension on the tight side of the belt.
A Equal to
B Less than
C Greater than
D None of these
If tension in the cable supporting a lift moving downwards is half the tension when it is moving upwards, the acceleration of the lift is
A $$\frac{{\text{g}}}{2}$$
B $$\frac{{\text{g}}}{3}$$
C $$\frac{{\text{g}}}{4}$$
D None of these
The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
A 18 bar diameters
B 24 bar diameters
C 30 bar diameters
D 36 bar diameters

Next steps