Related Questions

Two circular dials of exactly the same size are mounted on a wall side by side in such a way that their perimeters touch at one point. Dial 1, which is on the left , spins clockwise around its center , and dial 2 , which is on the right spins counter clockwise around its center . (Assume that there is no friction at the point of contact between the dials.) Each dial is marked on its perimeter at three points that are at equale distances around the points arked ondial 1 are N, O, and P and the points marked on dial 2 are X, Y, and Z. If points O and Z are just meeting at the point of contact between the dials , and if dial 1 spins at the same speed as dial 2, what is the smallest number of revolutions of each dial that will bring O and Z together again?
A 1
B 2
C 3
D 4
In which type of fluid flow, the velocity of flow of fluid changes from point to point in the fluid at any instant?
A Rotational
B Unsteady
C Turbulent
D Non-uniform
Point A is 10 miles West of Point B. Point b is 30 miles North of pint C. Point C is 20 miles East of Point D. What is the distance (in miles) between Point A and Point D?
A 1010
B 1020
C 2010
D 3010
Point A is 10 km west of point B. Point B is 30 km north of point C. Point C is 20 km east of point D. What is the distance between point A and D?
A 1020Km
B 1010Km
C 2010Km
D 3010Km
The position of center of pressure on a plane surface immersed vertically in a static mass of fluid is
A at the centroid of the submerged area
B always above the centroid of the area
C always below the centroid of the area
D none of the above
Point A is south of point B and point B is west point C. To which direction is point A with respect to point C ?
A South
B South West
C North east
D North West
Point A is 10 miles west of Point B. Point B is 30 miles North of Point C. Point C is 20 miles East of Point D. what is the distance between points A and D?
A 1010
B 810
C 710
D 910
A circle passing through the pitch point with its center at the center of cam axis is known as
A Pitch circle
B Base circle
C Prime circle
D Outer circle
The periodic time of a compound pendulum is __________ when the distance between the point of suspension and the center of gravity is equal to the radius of gyration of the body about its center of gravity.
A Zero
B Minimum
C Maximum
D None of these
When the load on the engine increases, it becomes necessary to increase the supply of working fluid and when the load decreases, less working fluid is required. The supply of the working fluid to the engine is controlled by a
A D-slide valve
B governor
C Meyer’s expansion valve
D flywheel

Next steps