A coarse grained steel

A Is less tough and has a greater tendency to distort during heat treatment
B Is more ductile and has a less tendency to distort during heat treatment
C Is less tough and has a less tendency to distort during heat treatment
D Is more ductile and has a greater tendency to distort during heat treatment

Correct Answer: Is less tough and has a greater tendency to distort during heat treatment

A coarse grained steel is less tough and has a greater tendency to distort during heat treatment
Bissoy MCQ
#Mechanical Engineering #Engineering Materials

Related Questions

For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as
A dry of OMC and wet of OMC
B wet of OMC and dry of OMC
C wet of OMC and wet of OMC
D dry of OMC and dry of OMC where OMC is optimum moisture content
A coarse grained grinding wheel is used to grind
A Hard and brittle materials
B Soft and ductile materials
C Hard and ductile materials
D Soft and brittle materials
Coarse grained soils are best compacted by a
A drum roller
B rubber tyred roller
C sheep’s foot roller
D vibratory roller
Which of the following methods is best suited for determination of permeability of coarse-grained soils ?
A constant head method
B falling head method
C both the above
D none of the above
Coarse grained steels have
A Low toughness
B No tendency to distort
C High density
D Very high toughness
The Gneiss is a coarse grained:
A Volcanic Rock
B Igneous Rock
C Metamorphic Rock
D Sedimentary Rock
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2

Next steps