Related Questions

The yield point in fatigue loading compared to that in static loading is less. The ratio of ultimate tensile strength to endurance limit of a material subjected to fatigue loading is
A 0.5
B 1
C 1.5
D 2
Yield point in fatigue loading as compared to static loading is
A Same
B Higher
C Lower
D Depends on other factors
Failure of a material is termed as fatigue failure, if it fails below the yield point. The resistance to fatigue failure of a material is measured by the
A Ultimate tensile strength (U.T.S.)
B Endurance limit
C Elastic limit
D None of these
Point A is 10 miles West of Point B. Point b is 30 miles North of pint C. Point C is 20 miles East of Point D. What is the distance (in miles) between Point A and Point D?
A 1010
B 1020
C 2010
D 3010
Point A is 10 km west of point B. Point B is 30 km north of point C. Point C is 20 km east of point D. What is the distance between point A and D?
A 1020Km
B 1010Km
C 2010Km
D 3010Km
Endurance is a measure of fatigue limit of a metal. Fatigue crack in nitrided machine parts originates
A At the surface
B Within the core
C Just below the surface
D Anywhere on the surface
Fatigue limit improvement by over stressing the metal by successively increasing the load is called coaxing. In fatigue failure, the material fails
A Below the yield point
B Above the yield point
C Below the elastic limit
D At the elastic limit
Point A is south of point B and point B is west point C. To which direction is point A with respect to point C ?
A South
B South West
C North east
D North West
Point A is 10 miles west of Point B. Point B is 30 miles North of Point C. Point C is 20 miles East of Point D. what is the distance between points A and D?
A 1010
B 810
C 710
D 910
When all the limiting reactant is consumed in the reaction, the operational yield __________ the relative yield.
A Is greater than
B Is smaller than
C Equals
D Can be either greater or smaller than (depends on the type of reaction)

Next steps