Bissoy.com
Doctors Medicines MCQs Q&A

When of the following is a system default profile used?

When of the following is a system default profile used? Correct Answer When there is no user logged on at the computer

Related Questions

A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from the vertical plane and 5 cm from the horizontal plane. What is distance from the point on line far away from the profile plane to profile plane?
What is the output of the following code snippet?

int p = 3;
switch (p) {
case 1: System.out.print("One");
case 2: System.out.print("Two");
default: System.out.print("Default");
}
Which of the following statements are true regarding the command ip route 172.16.4.0 255.255.255.0 192.168.4.2? 1. The command is used to establish a static route. 2. The default administrative distance is used. 3. The command is used to configure the default route. 4. The subnet mask for the source address is 255.255.255.0
Which of the following statements are true regarding the command ip route 172.16.4.0 255.255.255.0 192.168.4.2?
1. The command is used to establish a static route.
2. The default administrative distance is used.
3. The command is used to configure the default route.
4. The subnet mask for the source address is 255.255.255.0.
Consider the following statements: 1. In spur gears, the contact occurs abruptly on a line parallel to the axis, and the disengagement too is abrupt. 2. In helical gears, both loading and unloading are gradual, and therefore, these happen more smoothly and less noisily 3. When two gears mesh, any arbitrary shape of the tooth can be chosen for the profile of the teeth of any one of the two gears, and the profile for the other shall be obtained by applying the law of gearing. Which of the above statements are correct?
Consider the following statements regarding radial cam nomenclature: 1. Motion of the trace point describes movement of the follower 2. The curve generated by the locus of trace point is called cam profile 3. Actual working curve of cam is called pitch curve 4. Smallest circle that can be drawn tangential to cam profile is called base circle Which of these statements are correct? 
Statement (I): The ogee spillway is a control weir having an S-shaped crest profile which provides a high discharge coefficient without causing cavitations. Statement (II): The crest profile of ogee spillway conforms to the lower nappe of flow over a ventilated sharp-crested weir and ensures a constant discharge coefficient for all heads.
A line of length 15 cm touching the vertical plane and perpendicular to it at a distance of 20 cm away from horizontal plane and 5 cm away from the profile plane. Which view gives the distance from line to profile plane is 5 cm?
A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from vertical plane and 5 cm from the horizontal plane. What is distance from the line to xy reference line in top view?
A line of 12 cm length is perpendicular to profile plane and the least distance from this line to profile plane is 6 cm. This is at a distance of 4 cm from vertical plane and 5 cm from the horizontal plane. What is the distance from the line to xy reference line in front view?