Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

An alloy of nickel and tin has 20 % nickel. Another alloy of nickel and copper has nickel and copper in the ratio 1 ∶ 5. Both the alloys are mixed in the ratio 2 ∶ 5. Quantity of tin is what percent more/less than the quantity of nickel in the final alloy?
An alloy of Nickel and Chromium is to be made such that the alloy comprises of 80% Nickel and 20% Chromium. Mixture A comprises of 60% Nickel and 40% Chromium, while mixture B comprises of 90% Nickel and 10% Chromium. In what ratio should the mixtures be mixed in order to obtain the desired alloy?
An alloy A contains two elements, copper and tin in the ratio of 2 : 3, whereas an alloy B contains the same elements in the ratio of 3 : 4. If 20 kg of alloy A, 28 kg of alloy B and some more pure copper are mixed to form a third alloy C which now contains copper and tin in the ratio of 6 : 7, then what is the quantity of the pure copper mixed in the alloy C?
An alloy A contains two elements, copper and tin in the ratio of 2 ∶ 3, whereas an alloy B contains the same elements in the ratio of 3 ∶ 4. If 20 kg of alloy A, 28 kg of alloy B and some more pure copper are mixed to form a third alloy C which now contains copper and tin in the ratio of 6 ∶ 7, then what is the quantity of the pure copper mixed in the alloy C?
Invar tapes used for measuring base lines, is made of nickel-iron alloy containing nickel
Amal preparing an alloy by mixing the other two alloys. The first alloy contains zinc and carbon in the ratio of 1 : 3 and the second alloy contains Aluminium and zinc in the ratio of 2 : 3 (both these alloys have only these elements in the solution). If the new alloy contains Aluminum and Zinc in the ratio of 3 : 5, what is the percentage of carbon in the new alloy?
In one alloy, there is 50% steel in its total mass, while it is 75% in another alloy. 15 kg of the first alloy was melted together with 10 kg of the second one to form a third alloy. Find the percentage of steel in the new alloy when it is known that 20% of the total steel is getting diminished during the melting process?
Two alloys used to manufacture the third alloy. The first alloy contains Copper and Zinc only, and the second alloy contains Aluminium and Copper only. The Copper content in the two alloys is 40% and 60% respectively. The Zinc content in the new alloy should be between 30 to 40%. How much will be the minimum and maximum Copper content in the new alloy?
A thermocouple junction in the form of 4 mm radius sphere is to be used to measure the temperature of a gas stream. The junction is initially at 35 degree Celsius and is placed in a gas stream which is at 300 degree Celsius. The thermocouple is removed from the hot gas stream after 10 seconds and kept in still air at 25 degree Celsius with convective coefficient 10 W/m2 K. Find out the time constant of the thermocouple. Assume the thermos-physical properties as given below h = 37.5 W/m2 K p = 7500 kg/m3 c = 400 J/kg K
The following data pertains to the junction of a thermocouple wire used to measure the temperature of the gas stream. Density = 8500 kg/m3, specific heat = 325 J/kg K, thermal conductivity = 40 W/m K and the heat transfer coefficient between the junction and gas = 215 W/m2 K. If thermocouple junction can be approximated as 1 mm diameter sphere, determine how long it will take for the thermocouple to read 99% of the initial temperature difference