When a uniformly distributed load, shorter than the span of the girder, moves from left to right, then the conditions for maximum bending moment at a section is that

A The head of the load reaches the section
B The tail of the load reaches the section
C The load position should be such that the section divides it equally on both sides
D The load position should be such that the section divides the load in the same ratio as it divides the span

Correct Answer: The load position should be such that the section divides the load in the same ratio as it divides the span

Bissoy MCQ
#Civil Engineering #Structural Analysis

Related Questions

When a uniformly distributed load, longer than the span of the girder, moves from left to right, then the maximum bending moment at mid section of span occurs when the uniformly distributed load occupies
A Less than the left half span
B Whole of left half span
C More than the left half span
D Whole span
If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than
A $$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$
B $$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} + \frac{{2{\text{D}}}}{3}} \right)^2}$$
C $$\frac{{{\text{WL}}}}{{10}}{\left( {{\text{L}} - \frac{{2{\text{D}}}}{3}} \right)^2}$$
D $$\frac{{{\text{WL}}}}{{12}}{\left( {{\text{L}} - \frac{{\text{D}}}{3}} \right)^2}$$
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A $$\frac{2}{3}$$
B $$\frac{3}{2}$$
C $$\frac{5}{8}$$
D $$\frac{8}{5}$$
The natural frequency of free transverse vibrations due to uniformly distributed load acting over a simply supported shaft is (where $$\delta {\text{S}}$$ = Static deflection of simply supported shaft due to uniformly distributed load)
A $$\frac{{0.4985}}{{\sqrt {\delta {\text{S}}} }}$$
B $$\frac{{0.5615}}{{\sqrt {\delta {\text{S}}} }}$$
C $$\frac{{0.571}}{{\sqrt {\delta {\text{S}}} }}$$
D $$\frac{{0.6253}}{{\sqrt {\delta {\text{S}}} }}$$
Jasim is taller than Matin, but shorter than Shahin. Habib is taller than Jasim but shorter than Shahin. Babu is taller than Matin but shorter than Jasim. Who is in the middle position?
A Babu
B Jasim
C Matin
D Habib
Anis is shorter than Babu, but taller than Camelia. Doli is shorter than Anis but taller than Camelia. Emon is shorter than Babu but taller than Anis. Who is in middle position in items of height?
A Anis
B Babu
C Camelia
D Doli
Anis is shorter than Babu, but taller than Camellia. Doli is shorter than Anis but taller then Camellia. Emon is shorter than Babu but taller than Anis. Who is in the middle position in terms of height?
A Anis
B Babu
C Camelia
D Doli
Kamal is shorter than Ruhan, but taller than Anika, Dina is shorter than Kamal . Rubayet is shorter than Ruhan but taller than Kamal . Who is tallest in terms of height ?
A Kamal
B Ruhan
C Anika
D Dina
Jasim is shorter than Joli, but taller than Anika, Dina is shorter than Jasim, Malek is shorter than Joli but taller than Jasminb. who is the tallest in terms of height?
A Jasmin
B Joli
C Anika
D Dina
Roshan is taller than Hardik who is shorter than sushil .Niza is taller than Harry but shorter than Hardik .Sushil is shorter than Roshan . Who is the tallest ?
A Roshan
B Sushil
C Hardik
D Harry

Next steps