Related Questions

In the following sentence the word principal' occurs three times "The principal (1) aim of the principal (2) of the college was to help build new roads to link the area's principal (3)schools" Indicate the use(s) in which the meaning of the word “Principal is ‘chief or main',
A Use (1)
B Use(2)
C Use (3)
D Both (1) & (3)
Principal planes are planes having
A Maximum shear stress
B No shear stress
C Minimum shear stress
D None of the above
Two planes leave the airport at the same time . Minutes later, plane A is 33 miles due north of the airport and plane B is 56 miles due east of the airport . How far apart are the two planes ?
A 82
B 119
C 65
D 93
The balancing weights are introduced in planes parallel to the plane of rotation of the disturbing mass. To obtain complete dynamic balance, the minimum number of balancing weights to be introduced in different planes is
A 1
B 2
C 3
D 4
If the shearing stress is zero on two planes, then the angle between the two planes is
A 45°
B 90°
C 135°
D 225°
What is defined as the investment of loan or principal which is based not only on the original amount of the loan or principal but the amount of loaned or principal plus the previous accumulated interest?
A Effective rate of interest
B Nominal rate of interest
C Compound interest
D Simple interest
Arman wanted to have Tk. 39,200 as interest after 5 years. He has invested an amount in an account for 1 year at 8% interest rate. From the 2nd year, he invested the principal amount in another account offering 10% interest for 3 years. At the beginning of the fifth year he invested the Principal amount in another account at the rate of 11%. What was the principal amount? (assume simple interest rate)
A Tk. 50,000
B Tk. 80,000
C Tk. 70,000
D Tk. 90,000
E None of them
When a body is subjected to biaxial stress i.e. direct stresses ($${\sigma _{\text{x}}}$$) and ($${\sigma _{\text{y}}}$$) in two mutually perpendicular planes accompanied by a simple shear stress ($${\tau _{{\text{xy}}}}$$ ), then maximum shear stress is
A $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
B $$\frac{1}{2}\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + 4\tau _{{\text{xy}}}^2} $$
C $$\sqrt {{{\left( {{\sigma _{\text{x}}} - {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
D $$\sqrt {{{\left( {{\sigma _{\text{x}}} + {\sigma _{\text{y}}}} \right)}^2} + \tau _{{\text{xy}}}^2} $$
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
A Primary
B Secondary
C Revolved
D Successive
This type of surface is tipped to all principal planes of projection and does not appear true size in any standard view:
A Foreshortened
B Parallel
C Orthographic
D Oblique

Next steps