Related Questions

10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংয়ের গুণাঙ্ক তামার ইয়ংয়ের গুণাঙ্কের দুইগুণ হলে লোহার দৈর্ঘ্য বৃদ্ধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? ( A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young's modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1 :8
B 1 : 6
C 1 : 4
D 1 : 2
10 cm লম্বা ও 0.5 cm ব্যাসার্ধ বিশিষ্ট একটি তামা ও একটি লোহার তারকে জোড়া লাগিয়ে দৈর্ঘ্য 20 cm করা হল। জোড়া লাগানো তারটিকে বল প্রয়োগ করে লম্বা করা হল। লোহার ইয়ংকের গুণাস্ক তামার ইয়ংকের গুণাস্কের দুইগুন হলে লোহার দৈর্ঘ্য বৃধি ও তামার দৈর্ঘ্য বৃদ্ধির অনুপাত কত? (A steel and a brass wire, both having 10 cm length and 0.5 cm radius, are joined together making the total length of the combined wire 20 cm. The combined wire is stretched by applying a force. If the Young‘s modulus of steel is twice as much as that of brass, what will be the ratio of the extension of steel to the extension of brass?)
A 1:8
B 1:6
C 1:4
D 1:2
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
The cutting speed for drilling aluminium, brass and bronze with high speed steel drills varies from
A 10 to 20 m/min
B 18 to 30 m/min
C 24 to 45 m/min
D 60 to 90 m/min
Babbit lining is used on brass/bronze bearings to increase the
A Antifriction properties
B Compressive strength
C Bearing resistance
D Wear resistance
Steel is welded using the __________ flame.
A Carburising
B Neutral
C Oxidising
D All of the above
Actual flame temperature is always lower than the adiabatic flame temperature, because there is
A No possibility of obtaining complete combustion at high temperature
B Always loss of heat from the flame
C Both A & B
D Neither A nor B
The maximum adiabatic flame temperature in air is __________ the maximum flame temperature in pure oxygen.
A Lower than
B Higher than
C Same as
D Not related to
The maximum adiabatic flame temperature of fuels in air is __________ the maximum flame temperature in pure oxygen.
A Lower than
B Higher than
C Same as
D Not related to
What is the type of joining process called, where the parts to be welded are kept in contact and rotated relative to each other and axial pressure is applied when the desired temperature is obtained?
A Ultrasonic welding
B Forge welding
C Electron beam welding
D Friction welding

Next steps