Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In a Heat Exchanger, heat cannot be transferred by all the three means, that is Conduction, Convection and Radiation simultaneously.
Heat is transferred by all three modes of transfer, viz. conduction, convection and radiation in
A polished metal pipe 5 cm outside diameter and 370 K temperature at the outer surface is exposed to ambient conditions at 295 K temperature. The emissivity of the surface is 0.2 and the convection coefficient of heat transfer is 11.35 W/m2 degree. Calculate the overall coefficient of heat transfer by the combined mode of convection and radiation
Diagram shows transient heat conduction in an infinite plane wall. Identify the correct boundary condition in transient heat conduction in solids with finite conduction
On a clear night there is radiation from earth’s surface to space. On such a night, the water particles on the plant leaves radiate to the sky whose temperature may be taken as 200 K. The water particles receive heat by convection from the surrounding air, the convection heat transfer coefficient has a value of 30 W/m2 K. If the water should not freeze, make calculations for the air temperature
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow, and k = Thermal conductivity of the body)
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow and k = Thermal conductivity of the body)
Consider the following phenomena (i) Boiling (ii) Free convection in air (iii) Forced convection in air (iv) Conduction in air Identify the correct sequence (heat transfer coefficient)
When two fluids of the heat exchanger are separated by a plane wall, the thermal resistance comprises (i) Convection resistance due to the fluid film at the inside surface (ii) Conduction resistance (iii) Convection resistance due to the fluid film at the outside surface Identify the correct option
Which of the following statement is/are true? I. In solids, generally, the heat is transferred by conduction. II. No medium is required for transfer of heat by radiation.