Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following statements about LSU dryer are correct? Statement 1: LSU dryer is mainly used to dry the grains. Statement 2: LSU is a continuous flow mixing type of dryer.

Which of the following statements about LSU dryer are correct? Statement 1: LSU dryer is mainly used to dry the grains. Statement 2: LSU is a continuous flow mixing type of dryer. Correct Answer True, True

LSU is a continuous flow mixing type of dryer. LSU dryer is mainly used to dry the grains. It is popular in India and USA. The capital investment is high. The recommended air flow rate is 60-70m3/ min/ ton.

Related Questions

In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
Read the given statement(s) and conclusions carefully and select which of the conclusions logically follow(s) from the statement(s). Statements: 1) All biscuits are millets 2) All millets are grains Conclusions: 1. All biscuits are grains 2. All grains are millets
Product X is produced by mixing chemical A and chemical B in the ratio of 5 : 4. Chemical A is prepared by mixing two raw materials, P and Q, in the ratio of 1 : 3. Chemical B is prepared by mixing raw materials, Q and R, in the ratio of 2 : 1. Then the final mixture is prepared by mixing 8640 units of product X with water. If the concentration of the raw material Q in the final mixture is 50%, how much water had been added to product X?
Consider the following statements in respect of ‘mixers’ 1. Mass batch mixing of ingredients is the most desirable method. 2. Charging all materials into a drum mixer is done ‘at once’. 3. The quantity of material fed into a mixer should be not more than the quantity that can be used in less than 30 minutes after completion of mixing. 4. Reversing mixers have less capacity than tilting mixers. 5. In large mixers, additional time of mixing is allowed. Which of the above statements are correct?
Consider the following statements in connection with deflection-type and null-type instruments: 1. Null-type instruments are more accurate than the deflection-type ones. 2. Null-type of instrument can be highly sensitive compared to a deflection-type instrument. 3. Under dynamic conditions, null-type instruments are less preferred to deflection-type instruments. 4. Response is faster in null-type instruments as compared to deflection-type instruments. Which of the above statements are correct?
A three-star medicine is prepared by mixing two type of fluids (A & B) in ratio of 1 : 4. Fluid A is prepared by mixing two type of water, water M and water N in ratio of 4 : 5. Fluid B is prepared by mixing two type of water, water X and water N in ratio of 3 : 7. The final mixture is prepared by 675 units of three-star medicine with water Y. If the concentration of the water N in the final mixture is 60%, then how much water Y had been added to three-star medicine?
Statement 1: Removing of moisture content for grains in the food industry follows the thin layer model of drying bed. Statement 2: The model for removing moisture from grains is computerized to find out the exact amount of time of exposure of grains for the removal of moisture.
Drum dryer mainly handles the materials that are too thick for a spray dryer and too thin for a rotary dryer.
LSU type of dryer was developed in
A crow was eating grains facing north. He walked 10 m straight to eat grains and then 15 m to the left to drink water. He then again took a left turn and walked for 12 m to search some more grains. How far is he from his starting point (approximately)?