Pigments comprise ______ of the dry solids in paper coatings.

Pigments comprise ______ of the dry solids in paper coatings. Correct Answer 70%–90%

Pigments comprise 70%–90% of the dry solids in paper coatings. They are generally designed to mask or change the appearance of the base stock, improve opacity, impart a smooth and receptive surface for printing or provide special properties for particular purposes.
Bissoy MCQ

Related Questions

In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
An examination consists of two papers, Paper 1 and Paper 2. The probability of failing in Paper 1 is 0.3 and that in Paper 2 is 0.2. Given that a student has failed in Paper 2, the probability of failing in Paper 1 is 0.6. The probability of a student failing in both the papers is
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
Cast-coated paper is a very ___________ paper made by allowing the coating on the paper to dry on a large, chrome plated dryer along with a polished surface.
_________ is a measure of the solids content and the dry weight of fibers and other solids divided by the net wet weight of stock weight and expressed as a percentage.
_________ consists of paper trimmings and waste, paper not upto the level, and other paper that’s often re-used in the paper mill.
It is not uncommon to see the paper testing lab write down the test results on a scrape of paper to be given to the appropriate paper machine operator when the “courier” happens to come by the paper testing lab about 30 minutes later. What is the topic of discussion?
In an examination, a pupil's average marks were 63 per paper. If he had obtained 20 more marks for his Geography paper and 2 more marks for his History paper, his average per paper would have been 65. How many papers were there in the examination ?
Figure out from amongst the four alternatives as to how the pattern would appear when the transparent sheet is folded at the dotted line.
Paper Folding mcq question image