In relation to the grain of the hair, which direction should the tail be clipped?

In relation to the grain of the hair, which direction should the tail be clipped? Correct Answer with the grain of the hair

Rule of thumb is never clip against the grain of the hair. An ear should be clipped with the direction of hair growth while holding the ear firmly, with the ear flap laying flat on your fingers.
Bissoy MCQ

Related Questions

An aircraft with wing aft tail configuration has tail efficiency of 0.95 and tail volume ratio of horizontal tail is 0.7. Determine pitching moment coefficient slope for the tail. Given lift curve slope of tail is 4.2 per rad. Consider downwash derivative as 0.6.
A typical jet transport aircraft needs to be sized based on following parameters. Wing area S=50m2, MAC=5m. If tail volume coefficient of horizontal tail is 1 and tail area is 10m2 then, find the required tail moment arm.
In a city 40% of the people have black hair, 25% have black eyes and 10% have both black hair and black eyes. What percentage of the people in the city has neither black hair nor black eyes?
In a certain city 40% of the people have black hair, 25% have black eyes and 10% have both black hair and black eyes. What percentage of the people in the city have neither black hair nor black eyes?
In fixed hair method, the distance between _______ hair and__________ hair are fixed.
The grain direction is known as the machine direction (MD), while the cross direction (CD) is the direction of the paper at right angles to the MD.
In order to double its yield strength, the grain size of a steel of ASTM grain size number 2 should be changed to ASTM grain size number (neglect friction stress)
The engine of an aeroplane rotates in clockwise direction when seen from the tail end and the aeroplane takes a turn to the right. The effect of gyroscopic couple on the aeroplane will be to dip the nose and raise the tail.
Grain boundary diffusion makes a significant contribution to the total flux when___(Db and D1 are the diffusivities through the grain boundary and defect free lattice and ȣ, d are the effective thickneβ and grain size).
Calculate the mean diameter of the grain at t=5sec, Assume the grain boundary energy and mobility are given as 5 Nmm-1 and 10mm3J-1s-1 respectively? (Assume the mean size of the grain at t=0 as 3mm)