Which of the following person is famous as ‘Blade Runner’?

Which of the following person is famous as ‘Blade Runner’? Correct Answer Oscar Pistorius

Oscar Pistorius is famous as the blade runner because he uses the C – Shaped artificial limb to move. It is a prosthetic leg that has been attached knee down. With the C – Shaped prosthetic legs, people are able to walk, run, cycle etc and live a normal life.
Bissoy MCQ

Related Questions

Three runners A,B and C run a race, with runner A finishing 12 meters ahead of runner B and 18 meters ahead of runner C, while runner B finishes 8meters ahead of runner C. Each runner travels the entire distance at a constant speed. The length of the race is
Three runners A, B and C run a race, with runner A finishing 12 metres ahead of runner B and 18 metres ahead of runner C, in another race of same type runner B finished 8 metres ahead of runner C. Each runner travels the entire distance at a constant speed. The length of the race is :
A simple impulse turbine has a mean blade speed of 250 m/s. The nozzle angle is 20° and the steam velocity from the nozzle is 600 m/s. The turbine uses 3000 kg/h of steam. The blade outlet angle is 25°. Determine the amount of energy converted to heat by blade friction if the blade friction factor is 0.86.
In a single row impulse turbine, the absolute velocity of steam leaving the turbine is 900 m/s. The nozzle angel is 20°. The mean blade speed is 300 m/s. The inlet blade angle is equal to the outlet blade angle. Determine the angle made by the discharging steam with the tangent of the wheel at the exit of moving blade. Neglect friction on turbine blades.
Volume flow rate of water in a Francis turbine runner is 25 m3/s. The flow velocity, whirl velocity and blade velocity are 11 m/s, 10 m/s and 5 m/s respectively, all values given at runner inlet. Find the power developed by the turbine.
In a single row impulse turbine, steam leaves the nozzle at 600 m/s. The nozzle angle and the mean blade speed is 25° and 200 m/s. The blade velocity coefficient is 0.8. Determine the blade outlet angle if the steam leaves the turbine blades axially.
In a Parson’s reaction turbine, the outlet angle of blade is 25°. Calculate the work done per second by the blades if the blade mean blade speed is 60 m/s and the absolute velocity of the steam leaving the nozzle is 120 m/s. The mass flow rate of steam is 0.1 kg per second.
Which character, the nemesis of Road Runner, is continually frustrated by Road Runner’s ability to outrun him?
Number of buckets on runner of Pelton wheel is given by expression? (D-diameter of runner and d- diameter of jet)
___________is ratio of pressure energy change inside runner to total energy change inside runner