When the aircraft is moving forward, air entering the Pitot tube is at a __________ pressure than the static line.

When the aircraft is moving forward, air entering the Pitot tube is at a __________ pressure than the static line. Correct Answer Greater

At an instant where the aircraft is moving forward, the air entering the aircraft’s Pitot tube will be at a greater pressure than the static line. This phenomenon in turn causes the diaphragm to flex thus moving the pointer.
Bissoy MCQ

Related Questions

A pitot tube is inserted in a ventilation duct with the nose facing the air flow. A vertical U-tube manometer filled with alcohol (specific gravity 0.8) has been used for pressure measurements such that 10.2 mm is read as the total pressure and 8.8 mm as the static pressure. Given the density of air to be 1.2 kg/m3, the air velocity at the nose of the pitot tube in m/s is
Which of the following statements regarding static methods are correct?
1. Static methods are difficult to maintain, because you can not change their implementation.
2. Static methods can be called using an object reference to an object of the class in which this method is defined.
3. Static methods are always public, because they are defined at class-level.
4. Static methods do not have direct access to non-static methods which are defined inside the same class.
What does a pitot tube measure? Upon which principle does a pitot tube work?
The output of the following Python code is similar to the alphabet . . . . . . . .
import turtlet=turtle.Pen()t1=turtle.Pen()t2=turtle.Pen()t.forward(100)t1.forward(100)t2.forward(100)t1.left(90)t1.forward(75)t2.right(90)t2.forward(75)
Air flows through a 10 cm internal diameter tube at the rate of 75 kg/hr. Measurements indicate that at a particular point in the tube, the pressure and temperature of air are 1.5 bar and 325 K whilst the tube wall temperature is 375 K. Find heat transfer rate from one meter length in the region of this point The general non-dimensional correlation for turbulent flow in the tube is Nu = 0.023 (Re) 0.8 (Pr) 0.4 Where the fluid properties are evaluated at the bulk temperature
What is the result of compiling and running the following code?
public class Tester{static int x = 4;public Tester(){System.out.print(this.x); // line 1Tester();}public static void Tester(){ // line 2System.out.print(this.x); // line 3}public static void main(String... args){ // line 4new Tester();}}
What is the result of compiling and running the following code?
public class Tester{static int x = 4;int y = 9; public Tester(){System.out.print(this.x); // line 1printVariables();}public static void printVariables(){System.out.print(x); // line 2System.out.print(y); // line 3}public static void main(String... args) { // line 4new Tester();}}
When an aircraft is grounded, the pitot static tube is generally covered.
The pitot static tube does not measure the __________ pressure.
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin