Corrosion of materials results in ___________ of fatigue limit.

Corrosion of materials results in ___________ of fatigue limit. Correct Answer reduction

Corrosion of a material is not a desirable quality. This is because even a small amount of it can cause a reduction of fatigue limit. Even flaws like lack of uniform cross-section in the specimen can have the same effect.
Bissoy MCQ

Related Questions

If the sample is tested for a large number of cycles below its fatigue limit and the stress is gradually increased above the fatigue limit, the true fatigue limit of material will _______
A material is a fatigue tested below the fatigue limit for few millions of cycles and then retested at higher than fatigue limit. This process is known as ___________
Corrosion of less corrosion-resistant metal is usually increased and the attack of the more corrosion-resistant is decreased in galvanic corrosion.
The fatigue limit of a specimen is ___________ of its fatigue range.
High fatigue strength materials are the better choice than corrosion resistant materials.
Corrosion fatigue is defined as the reduction of fatigue resistance due to the presence of a corrosive medium.
The yield point in fatigue loading compared to that in static loading is less. The ratio of ultimate tensile strength to endurance limit of a material subjected to fatigue loading is
Endurance is a measure of fatigue limit of a metal. Fatigue crack in nitrided machine parts originates
Fatigue limit improvement by over stressing the metal by successively increasing the load is called coaxing. In fatigue failure, the material fails
The material with higher stacking fault energy has higher fatigue strength whereas the material with lower stacking fault will have a lower fatigue limit.