Related Questions

A torsion bar of constant inner radius and length is applied with constant torque. What will happen for the angular displacement if outer radius of torsion bar is increased?
In a ring beam subjected to uniformly distributed load
i) shear force at mid span is zero
ii) shear force at mid span is maximum
iii) torsion at mid span is zero
iv) torsion at mid span is maximum
The correct answer is
The typical test temperature in the hot torsion testing is _________
The setup of a torsion test involves two clamps having a distance of _________ inches between them.
In the torsion test, there are two clamps. The clamps are _________
If a wire that has a diameter of less than 0.033 inches has to undergo a torsion test, the length of the specimen being used must be _________ inches.
Two shafts 'A' and 'B' are made of same material. The shaft 'A' is solid and has diameter D. The shaft 'B' is hollow with outer diameter D and inner diameter $$\frac{{\text{D}}}{2}$$. The strength of hollow shaft in torsion is _________ as that of solid shaft.
Which of the following statements regarding static methods are correct?
1. Static methods are difficult to maintain, because you can not change their implementation.
2. Static methods can be called using an object reference to an object of the class in which this method is defined.
3. Static methods are always public, because they are defined at class-level.
4. Static methods do not have direct access to non-static methods which are defined inside the same class.
A program will have one function prototype for each function defined in the programmer-defined section of the program. (Assume that the programmer-defined section is located below the main function.)
Two shafts ‘A’ and ‘B’ under pure torsion are of identical length and identical weight and are made of the same material. The shaft ‘A’ is solid and the shaft ‘B’ is hollow. We can say that