Bissoy.com
Doctors Medicines MCQs Q&A

The relationship between the alternating stress and mean stress is given by the following equation: σa= σe. The value of x for Goodman line is equal to _________

The relationship between the alternating stress and mean stress is given by the following equation: σa= σe. The value of x for Goodman line is equal to _________ Correct Answer . The value of x for Goodman line is equal to _________ ] 1

The Goodman line follows a straight-line path. So, when the value of x is equal to one, the equation σa= σe becomes the equation of the straight line.

Related Questions

The relationship between the alternating stress and mean stress is given by the following equation: σa=σe, where σe is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________
For a given component, the alternating stress is equal to 250 MPa, Mean stress is 100 MPa, and the ultimate tensile strength is 500 MPa. Find the yield strength of the material according to Goodman’s approach?
Below stated are some of the statements about the Alternating current. You need to identify which of the following is incorrect, 1. DC power is far more powerful than AC power. The efficiency and power to size characteristics of DC motors and apparatuses are increased. Lighting by DC (LED) is 75% more efficient than lighting from incandescence. 2. A comparatively high voltage alternating current may be generated and easily raised and dropped by the static equipment known as the transformer, which makes electrical energy transmission and distribution economical, 3. Initial costs and maintenance of the AC motor are less expensive since it has no switch and is less powerful than the DC motor for constant working speed, hence it is desired to create power as alternating current. 4. The great efficiency of transmission in ac makes electric power generation cost-effective, Produced in huge quantities in one station and distributed throughout a vast area.
Tresca or maximum-shear stress criteria assumes that yielding occurs when the maximum shear stress reaches a value of the shear stress in the uniaxial tension test. Assume the principal stress being σ1, σ2, σ3 where σ1 is largest, and σ3 is the smallest principal stresses. Find the value of minimum shear stress to cause yielding, given that yield stress in tension is equal to σo?
Assertion (A): When there is an evidence of a linear relationship between two variables, it may not always mean an independent-dependent relationship between the two variables.
Reason (R): The casual relationship between the two variables may not imply a reasonable theoretical relationship between the two.
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
The crack propagation rate with stress is given as ______ Where; -> da/dN is crack growth with each cycle -> C is constant -> σm is mean stress -> σa is alternating stress -> a is the crack length -> m and n are constant
Each of the following question and two statements numbered I and II given below it. You have to decide whether the data give in the statements are sufficient to answer the question. Read both the statements and choose the most appropriate answer. How many person standing between Kamal and Luvkush in a straight line of 15 persons (Note: all are standing in a straight line facing north) I) Shiv stands eleventh from the right end of the line. Luvkush stands exactly at the center of the line. There are as many persons to the right of Kamal as there are to the left of Shiv. II) Ram stands fourth from the left end of the line. Shiv sits to the immediate right of Ram.. Only two person stand between Luvkush and Shiv, who is left of Luvkush. Only two person Stand between Kamal and Shiv.
For a given component, the alternating stress is equal to 250 MPa, Mean stress is 100 MPa, and the ultimate tensile strength is 500 MPa. Find the yield strength of the material according to the Gerber’s approach?
A class III mathematics teacher gave the following questions to her students:  \(\begin{equation} \frac{ \begin{array}[b]{r} 256 \\ + 173 \end{array} }{ } \end{equation}\) \(\begin{equation} \frac{ \begin{array}[b]{r} 28 \\ + 32 \end{array} }{ } \end{equation}\) \(\begin{equation} \frac{ \begin{array}[b]{r} 129 \\ + 76 \end{array} }{ } \end{equation}\) Later she asks the students to solve a worksheet that has similar questions. Which of the following statements is appropriate for the given situation?