If an annealing process is carried completing in 50 min at temperature T and the annealing time is reduced to 25 min, the temperature should be increased by ________

If an annealing process is carried completing in 50 min at temperature T and the annealing time is reduced to 25 min, the temperature should be increased by ________ Correct Answer T+10° Degree

This is experimentally observed that on every 10° increase in temperature, the recrystallization time is reduced to half. So, the temperature should be increased by 10°.
Bissoy MCQ

Related Questions

A university library budget committee must reduce exactly five of eight areas of expenditure—I, J, K, L, M, N, O and P—in accordance with the following conditions: If both I and O are reduced, P is also reduced.
If L is reduced, neither N nor O is reduced.
If M is reduced, J is not reduced.
Of the three areas J, K, and N exactly two are reduced. Question : If both K and N are reduced, which one of the following is a pair of areas neither of which could be reduced?
A takes 24 day in completing a work alone.Time taken by A in completing 1/3rd of thework is equal to the time taken by B incompleting half of the work. How many dayswill be taken in completing the work if both A& B start working together?
Workmen arrive at a mine workshop to receive tools for maintenance. The inter-arrival time of workmen at the service counter is exponentially distributed with an average time of 10 min. The service time at the counter is also distributed exponentially with a mean time of 6 min. The average time spent by a workman waiting for his turn to be served in min is
Output of a bulldozer is
(i) Increased if drawbar HP of the tractor is increased for a given hauling distance
(ii) Decreased if drawbar HP of the tractor is increased for a given hauling distance
(iii) Increased if the hauling distance is increased for a given drawbar HP of the tractor
(iv) Decreased if the hauling distance is increased for a given drawbar HP of the tractor
Consider the following statements regarding ICAO recommendation for correction to basic runway length of these statements
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation.
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient.
The heat treatment process in which a steel is heated to a temperature below the A1 (Temperature is below process annealing temperature) and is held at this temperature for sufficient time and then cooled is called
Statement : Every year thousands of eligible students do not get admission in colleges both in urban and rural areas after passing their school leaving certificate examination.

Courses of Action :
I. More colleges should be set up in both urban and rural areas.
II. The number of schools in both urban and rural areas should be reduced.
III. More schools should offer vocational courses to equip students for taking up their vocation after completing their school education.
Two filling taps P and Q together can fill a tank with rate of 40 lit/min and 60 lit/min respectively in 8 min. If a waste tap can empty the filled tank in 32 min, then what is the rate of waste tap ?
Three pipes A,B and C attached to a cistern. A can fill it in 10 min, B in 15 min, C is a waste pipe for emptying it. After opening both the pipes A and B, a man leaves the cistern and returns when the cistern should have been just full. Finding, however, that the waste pipe had left open, he closes it and the cistern now gets filled in 2 min. In how much time the pipe C, if opened alone, empty the full cistern?
Two pipes A and B can fill a cistern in 12 min and 16 min respectively. Both the pipes are opened together for a certain time but due to some obstruction the flow of water was restricted to $$\frac{7}{8}$$ of full flow in pipe A and $$\frac{5}{6}$$ of full in pipe B. This obstruction is removed after some time and tank is now filled in 3 min from that moment. How long was it before the full flow.