Bissoy.com
Doctors Medicines MCQs Q&A

As the ASTM grain size number increases, the grain diameter will ______________

As the ASTM grain size number increases, the grain diameter will ______________ Correct Answer decrease

The ASTM grain size number is given by: -> G=-2.9542+1.4427 ln na So as the value of G increases, na will also increase (number of grain in per mm square increase). So, the grain size will decrease.

Related Questions

In order to double its yield strength, the grain size of a steel of ASTM grain size number 2 should be changed to ASTM grain size number (neglect friction stress)
An ASTM grain size determination is being made from a photomicrograph of a metal at a magnification of 1X. What is the ASTM grain size number of the metal if there are 992 grains per square mm?
If a steel having ASTM grain size number 5 have transition temperature equal to 20 degrees. For the same steel having ASTM grain size 10, the DBTT will be equal to __________
As the ASTM grain size number increases, the number of grain per unit volume will ______________
A copper sample has been metallographically analysed for determining its mean grain size. It is found to have an ASTM grain size number of 5. The number of grains per mm2 in the sample will be
The largest size of immobilised segment of dislocation in a Frank Read (FR) source contained in a polycrystalline material is of the order of grain size. In a metal of 10 μm grain size, the shear stress required to operate such a FR source is 100 MPa. If the grain size in the same metal is reduced to 10 μm, the shear stress required to operate such FR source would be . . . . . . . . MPa.
A material with grain size of ASTM No.6 has a lattice frictional stress 100 MN/m2 and locking parameter (Hall-Petch constant) 0.10 MN/$${m^{\frac{3}{2}}}$$
Grain size of the material is approximately
Kamala has three cylindrical containers, each with radius 20 cm that she wants to fill with grain. If her bag of grain contains 100 kg of grain, and she fills all three containers to a height of 70 cm, how much grain will be left in the bag, if 1 kg grain occupies 3000 cm3 space? (Use π = \(\frac{{22}}{7}\))
Engines are rated at specified conditions. Then which of the following statements are correct? 1. Power developed increases as local temperature increases. 2. Power developed increases as local temperature decreases 3. Power developed is not dependent on local temperature. 4. Power developed increases as local atmospheric pressure increases. 5. Power developed increases as local atmospheric pressure decreases.
Calculate the mean diameter of the grain at t=5sec, Assume the grain boundary energy and mobility are given as 5 Nmm-1 and 10mm3J-1s-1 respectively? (Assume the mean size of the grain at t=0 as 3mm)