In a shell and coil type water cooled condenser, the refrigerant is passed through the ________

In a shell and coil type water cooled condenser, the refrigerant is passed through the ________ Correct Answer Shell

The refrigerant having lesser pressure drop is always considered to be kept at the annulus side of the double pipe setup, hence the cooling water in the inner tube as it faces larger pressure drops and in the tube side of as Shell-and-tube type setup.
Bissoy MCQ

Related Questions

What is the ratio of the mass of refrigerant flowing through condenser and mass of refrigerant flowing through the evaporator, i.e., m2 / m1? If m1 = mass of refrigerant passing through the evaporator m2 = mass of refrigerant passing through the condenser
A two pass surface condenser is required to handle the exhaust from a turbine developing 15 MW with specific steam consumption of 5 kg/k W h. The quality of exhaust steam is 0.9, the condenser vacuum is 66 cm of mercury while the bar meter reads 76 cm of mercury. The condenser tubes are 28 mm inside diameter, 4 mm thick and water flows through tubes with a speed of 3 m/s and inlet temperature 20 degree Celsius. All the steam is condensed, the condensate is saturated water and temperature of cooling water at exit is 5 degree Celsius less than the condensate temperature. Assuming that overall coefficient of heat transfer is 4 k W/m2 degree, determine the mass of cooling water circulated
একটি স্টেপ আপ ট্রান্সফরমারে, গৌণ কুণ্ডলীর পাকসংখ্যা মুখ্য কুন্ডলীর পাকসংখ্যার দ্বিগুণ। যদি মূখ্য কুন্ডলীকে কোন পরিবর্তী বিদ্যুৎ লাইনের সাথে সংযুক্ত করা হয়, তাহলে মুখ্য কুণ্ডলীর তুলনায় গৌণ কুণ্ডলীতে- (In a step up transformer, the number of turns in the secondary coil is twice to that of primary coil. If you apply an alternating current in the primary coil, then in the secondary coil compared to the primary coil-)
What is the relation between m1, m2, and m3? If m1 = mass of refrigerant passing through the evaporator m2 = mass of refrigerant passing through the condenser m3 = mass of liquid evaporated in the intercooler
A certain amount of current flows through a ring shaped coil with fixed number of turns. How does the magnetic induction B varies inside the coil if an iron core is threaded into coil without dimensional change of coil?
Which one of the following condenser matches the given description – ‘The condenser has a shell containing tubes within which the coolant liquid usually flows. The flow on the shell-side is so designed that the vapour gas mainly flows in the cross-flow direction with respect to the tubes’?
What is the ratio of the mass of refrigerant supplied to evaporator and mass of refrigerant circulating through condenser i.e., m1 / m2?
What is the ratio of the mass of liquid refrigerant passing through the condenser and mass of liquid refrigerant supplied to the heat exchanger i.e., m3 / m2?
High level counter flow type jet condenser requires an injection pump to pump cooling water inside the condenser shell (when water under pressure isn’t available).
A large circular coil of N turns and radius R carries a time varying current $$I = {I_0}\sin \left( {\omega t} \right).$$   A small circular coil of n turns and radius r(r ≪ R) is placed at the centre of the large coil such that the coils are concentric and coplanar. The induced emf in the small coil