Bissoy.com
Doctors Medicines MCQs Q&A

Double pipe water cooling condensers have a capacity at around ________

Double pipe water cooling condensers have a capacity at around ________ Correct Answer 10 TR

Double pipe water cooling condensers owing to its tube-in-tube setup with small area and good pressure drop handling ability, does not have a very large cooling capacity if used in a refrigeration system, hence the minimum of all the options is correct.

Related Questions

Two pipes are connected to tank 1 and one pipe connects tank 1 and tank 2 at the bottom of both tanks. At first pipe A and pipe B will filling tank 1 and then pipe C would be opened to fill tank 2. Capacity of tank 1 is twice capacity of tank 2. Pipe C takes 8 minutes to fill the whole tank 2 wherein discharging capacity of pipe C is 62.5 liters per minute. Ratio of time taken by pipe A and B to fill the tank when operating alone is 4 : 5 then find approximate discharging capacity of pipe A and B in liters/ minute if both the pipes discharge equal amount of water in tank. Time taken by pipe A and B to fill the tank 1 is 20/ 3 minutes
A pipe, working at full speed, can fill an empty cistern in 1 hour. However, during the first hour it worked at one-twenty-fourth of its capacity, during the second hour at one-twelfth of its capacity, during the third hour at one-eighth of its usual capacity, during the fourth hours at one-fourth of its usual capacity and during the fifth hour it was only one-half as efficient as it was supposed to be. A second pipe also displayed similar performance, but if it worked at full speed would have filled the empty cistern in 2 hours. Together with a drain pipe that drained water out of the tank a constant rate, the empty cistern could be filled in 5 hours, all the three pipe working concurrently. How many hours will it take the drain pipe to empty the filled cistern if no other pipe was functioning during the time?
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank.
Consider the following statements for cooling towers: 1. Cooling tower is an artificial device used to cool the hot cooling water coming out of condenser more effectively. 2. The amount of water usually lost with induced draft cooling tower ranges from 5% to 6% by evaporation. 3. The amount of water usually lost with induced draft cooling tower ranges from 7% to 8% by drift losses. 4. The rate of evaporation of water and its cooling effect on the remaining water depends upon the relative humidity of air passing through the tower. Which of the above statements are correct?
Four pipes P, Q, R and S are connected to a tank. Pipe P, Q, R and S can fill the whole tank in 300/37 minutes. Ratio of time taken by pipe P to fill the tank when operating alone and pipe Q to fill the tank when operating alone is 3 : 2, pipe Q is 20% more efficient then pipe R and time taken by pipe S is 10 minutes more than pipe R. Find difference between time taken by pipe Q and pipe P to fill up the tank alone. 
To fill the tank Pipe A and Pipe B takes 12hours. Pipe B and Pipe C takes 9 hours to fill the tank and Pipe C and Pipe A together take 15 hours to fill the tank. Find the time taken to fill the tank when Pipe A, Pipe B and Pipe C opened together(approximately).
A container of 425 liters was filled with chemicals through two pipes. The first pipe was kept open for 5 hours more than the second pipe. If the first pipe remains open for as long as the second pipe remains open, and the second pipe remains open for as long as the first pipe remains open, then the quantity of chemical filled by the first pipe was half the quantity of chemical filled by the second pipe. If both the pipes are opened simultaneously, the tank will be filled in 17 hours. For how long was the second pipe open?
Pipe A takes 10 hours more than Pipe B to fill a tank. Pipe C(which is equally efficient as Pipe A and Pipe B together), fills the same tank in 12 hours. In how many hours will Pipe A, Pipe B and Pipe C fill the tank if Pipe A is accompanied by B and C on alternate hours.
Pipe A is 40% more efficient then pipe E, Pipe B requires 4 minutes less to fill up the tank alone then pipe E, ratio of time taken by Pipe C and pipe A is 5 : 6, pipe C requires 15 minutes to empty the whole tank, if all the pipes are opened together then it requires 48/ 11 minutes to fill up the whole tank. Find the ratio of time taken by pipe B and pipe C to fill up the tank alone.