Bissoy.com
Doctors Medicines MCQs Q&A

The fin spacing is usually preferred to be ___________ to minimize the fouling effect by dust and to allow free flow of air with little resistance.

The fin spacing is usually preferred to be ___________ to minimize the fouling effect by dust and to allow free flow of air with little resistance. Correct Answer Large

The lesser the fin spacing, the less is the turbulence and fouling as here the gases strike less frequently.

Related Questions

A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube without fin
A heating unit is made in the form of a vertical tube of 50 mm outside diameter and 1.2 m height. The tube is fitted with 20 steel fins of rectangular section with height 40 mm and thickness 2.5 mm. The temperature at the base of fin is 75 degree Celsius, the surrounding air temperature is 20 degree Celsius and the heat transfer coefficient between the fin as well as the tube surface and the surrounding air is 9.5 W/m2 K. If thermal conductivity of the fin material is 55 W/m K, find the amount of heat transferred from the tube with fin
In the following question, the first and the last part of the sentence/passage are numbered 1 and 6. The rest of the sentence/passage is split into four parts and named P, Q, R, S. These four parts are not given in their proper order. Read the sentence/passage and find out which of the four combinations is correct. S1. Marine biologists are investigating the deaths of at least six whales found washed up on France's western shores. P. They have no apparent sign of having been hit up by a ship or caught in a trawler's net. Q. Fin whale is the second-largest species of whale after the blue whale.  R. So, researchers on Monday, used a mechanical digger and long knives to dissect one of the fin whales. S. In an average year, between three and, at most, 10 fin whales are deposited dead on France's beaches. S6. The most recent fin whale corpse was found on Friday near Saint-Hilaire-de-Riez.
“Effectiveness of fin is the ratio of the fin heat dissipation with fin to that of no fin”.
A fin length l, protrudes from a surface held at temperature T0; it being higher than the ambient temperature Ta. The heat dissipation from the free end of the fin is stated to be negligibly small. What is the temperature gradient (dT/dx)x=l at the tip of the fin?
All the forms of matter except gases emit electromagnetic radiation continuously. The gases which electrically or thermally excited emit a certain wavelength only, then which of the following is/are true about the process (i) The spacing between the atoms in the other forms of matter is high than in gas (ii) The spacing between the atoms in gases is high than the other forms of matter (iii) The energy of the emitted radiation depends on the spacing between the atoms (iv) The wavelength of the emitted radiation depends on the spacing between the atoms 
To measure and control dust particulates in the foundry, dry dust technologies are mostly preferred than the wet dust technologies.
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
Consider the following pairs: Pollutant Effect on Human Health 1.Dust of Coal Black Lung Disease 2.Textile Dust Byssinosis 3.Silica Dust Silicosis 4.Arsenic Death of RBCs Which of the above-given pair/s is/are correct?
The question below consists of a set of labelled sentences. Out of the four options given, select the most logical order of the sentences to form a coherent paragraph. P: Intense heating of the ground creates convection currents. Q: Dust storms are caused by strong winds that travel over dry, arid land with little vegetation and pick up tiny particles such as sand, dust and other debris. R: The air over the ground becomes hot and rises and the vacuum it creates is filled by cooler winds, resulting in a storm. S: In arid areas, the storm picks up sand and loose soil, which are light and thus travel fast with it.