Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

How much nitrogen must be added to a 20% nitrogen solution to obtain 100 Kg of 40% nitrogen solution?
A chemical solution appears green when the salt concentration is 8 grams per litre (gpl) and red when it is 10 gpl. Pure water was added to the solution of 1 litre of 15 gpl solution till it turned green. Then 125 ml of the green solution is taken out and x grams of salt is added to the green solution to make it red. Another 500 ml of the final solution was taken out and y litres of green solution is added to get a resultant solution of concentration 9.6 gpl.  Assume adding salt doesn’t change its volume and find the ratio of x and y. 
Solution-1 containing 30% acetic acid and 100% nitrogen at the rate 10 Kg/min combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate 20 Kg/min and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate 30 Kg/min the product formed contains 20% acetic acid, what is the percentage of nitrogen in product?
A 60% spirit solution is mixed with r% spirit solution in the ratio 1 : 3 such that a s% spirit solution is obtained. When a (s/3)% spirit solution is mixed with 55% spirit solution in equal ratio, an (r/2)% spirit solution is obtained. Which of the following can be determined? (A) Value of ‘r’ (B) Value of ‘s’ (C) Volume of the 60% spirit solution mixed initially (D) If 9 liters of r% spirit solution was mixed initially, what was the volume of the s% spirit solution thus obtained?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate F combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate D and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate P, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate F combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate D and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate 10 Kg/min, what is the percentage of nitrogen in product?
Solution-1 containing 30% acetic acid and 20% nitrogen at the rate 10 Kg/min combines with Solution-2 containing 20% acetic acid and 10% nitrogen at the rate 20 Kg/min and Solution-3 containing 10% acetic acid and 30% nitrogen at the rate N the product formed contains 20% acetic acid at the rate P, what is the percentage of nitrogen in product?
Which of the following is correct with regarding the formation of Nitrogen? I. Nitrogen is obtained by liquefaction and fractional distillation of air. II. Nitrogen is obtained by reacting an aqueous solution of Ammonium chloride with Sodium Nitrite. III. Decomposition of Sodium or Barium Azide at high-temperature results in the formation of pure Nitrogen. IV Nitrogen is not soluble in water.
Solution of nitrogen in liquid iron may be assumed to follow Sievert's law. Nitrogen content of liquid iron. at 1873K in equilibrium with 1 atm pressure of nitrogen is measured as 0.044 (mass %). What will be the equilibrium nitrogen content in liquid iron (mass%), if nitrogen pressure is reduced to 0.25 atm?
Bottle A contains 100 ml of 20% saline solution, while bottle B contains 40 ml of 40% saline solution. 10 ml of water is accidently added to the bottle B. What amount of solution from bottle A should be poured in Bottle B to obtain a 25% saline solution?