Which of the following is/are the characteristics of carbon and graphite?

Which of the following is/are the characteristics of carbon and graphite? Correct Answer It has good thermal and electrical conductivity, excellent thermal shock resistance, weak and brittle as compared with metals

Carbon and graphite are the unique non-metallics that are good thermal and electrical conductors with excellent thermal shock resistance. They are weak and brittle as compared with metals.
Bissoy MCQ

Related Questions

An Fe/graphite diffusion couple is annealed at 1273 K. The carbon content (in mass %) on the Fe side of the Fe/graphite diffusion couple will be close to
Directions : For the Assertion (A) and Reason (R) below, choose the correct alternative Assertion(A) : Graphite is slippery and used as a lubricant. Reason (R) : Graphite has free electrons.
Graphite fibres are used to make undirectional Al-matrix composites. Young's modulus of graphite and aluminium are 400 GPa respectively. If a composite contains 60 volume % of fiber and is loaded along the fiber direction, the Youngs Modulus of the composite is . . . . . . . . GPa.
State whether the following statement is true or false regarding materials used in Electro discharge machining. “In metals, copper graphite has less electrical conductivity than graphite.”
Which method uses oxidizing agents to convert graphite into graphite oxide for the production of graphene?
Spheroidal Graphite Iron (SG Iron) consists of nodules of graphite?
The value ∆H transition of C (graphite) → C (diamond) is 1.9 kJ/mol at 25℃ entropy of graphite is higher than entropy of diamond. This implies that?
In the carbonation of a soft drink, the total quantity of carbon dioxide required is the equivalent of 3 volumes of gas to one volume of water at 0⁰C and atmospheric pressure. Calculate (i) the mass fraction and (ii) the mole fraction of the CO2 in the drink, ignoring all components other than CO2 and water. Basis 1 m3 of water = 1000 kg Volume of carbon dioxide added = 3 m3 From the gas equation, pV = nRT 1 x 3 = n x 0.08206 x 273 n = 0.134 mole. Molecular weight of carbon dioxide = 44 And so weight of carbon dioxide added = 0.134 x 44 = 5.9 kg
In industries titanium is hardened through diffusion of carbon. The concentration of carbon at 1mm into the surface of the titanium slab is 0.25kg/m3 and at 3mm the concentration is 0.68kg/m3. The rate at which the carbon is entering into its surface is 1.27*10-9kg/m2.s. calculate the value of diffusion coefficient of carbon.
Combined carbon content in iron and steel is determined by treating the sample with dilute HNO3. So that combined carbon forms a soluble brown nitrated compound, the intensity of which is matched with that of a standard sample of similar composition treated under similar condition. The intensity of color produced is proportional to the carbon content of iron of steel sample. This method of combined carbon determination is called the