When the upper and lower natural tolerance limits are equal to the upper and lower specification limits, the process capability ratio, cp is ________

When the upper and lower natural tolerance limits are equal to the upper and lower specification limits, the process capability ratio, cp is ________ Correct Answer Equal to 1

When the natural tolerance limits are having a equal value to the specification limits for a quality characteristic, the process capability ratio, cp is having a value equal to 1.
Bissoy MCQ

Related Questions

For a process, the upper specification limit and lower specification limits are 62 and 38 respectively. If the process has its mean equal to 53, and its standard deviation 2, what is the value of Cpk for this process?
The upper specification limit of a product is 20.05 mm and the lower specification limit of the same product is 19.95 mm. The standard deviation is 0.25 mm. What is the value of the process capability index Cp?
Process capability compares the output of an in-control process to the specification limits by using capability indices.
There are 150 gearwheels in a box, out of which 112 are within the required tolerance, 21 are below and rest are above the required tolerance. If the selection is done without replacement, the combined probability of randomly selecting a gearwheel below the tolerance and then a second one above the tolerance is
Process capability index (CP) indicates the process of potential performance by relating the natural process spread to the specification spread.
Process capability analysis finds out whether the process is fundamentally capable of meeting the specified tolerance limits.
In the following question, the 1st and the last part of the sentence/passage are numbered 1 and 6. The rest of the sentence/ passage is split into four parts and named P, Q, R and S. These four parts are not given in their proper order. Read the sentence/passage and find out which of the four combinations is correct. 1. We need to live and let live in peace. P. Such an environment is not good for our country's growth. Q. This is the basic philosophy of tolerance. R. Lot of unrests happen due to the lack of tolerance. S. Thus, people across all societies should be urged to practice tolerance. 6. This is the only way to move ahead.
A software requirement specification is : i) A contract between developers and clients specifying what the developers will produce for the clients. ii) A specification of the features that the target software deliverable must have iii) A specification of the personal and resources that will be committed to the software development effort
A resistor of 10 kΩ with 5% tolerance is connected in parallel with a 5 kΩ resistor of 10% tolerance. What is the tolerance limit for the parallel network?
Limited power transfer capability occurs due to a weak network aggravated by generators hitting their ________ power capability limits