Additives can be added in a lubricant to enhance its performance during metal forming operations.

Additives can be added in a lubricant to enhance its performance during metal forming operations. Correct Answer True

In metal forming process, several types of additives are mixed with lubricant to enhance the performance of the lubricant. The extreme pressure (EP) additives are generally used in heavy work metal operations. The temperature dependent EP additives, such as chlorine, phosphorus, and sulphur are mainly used to create chemical films that prevent metal to metal contact during forming operations.
Bissoy MCQ

Related Questions

In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the fouralternatives.
Job performance is ______ by a number of factors. Motivation alone does not lead to increased performance. Ability and technology moderates the relationship
between motivation and performance. The higher the levels of ability and motivation the ______ the level of performance will be. However, increasing motivation
beyond an ______ level tends to ______ a dysfunctional result because it is ______ by an increased level of anxiety.
motivation and performance. The higher the levels of ability and motivation the ______ the level of performance will be.
Statement 1: Food additives are divided into direct and indirect types. Statement 2: Direct food additives become a part of the food during packaging. These are in trace amounts.
In the metal forming operations, forming dies are also called as progressive dies.
A lubricant should not corrode the working parts and it must retain its properties even in the presence of foreign matter and additives.
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the fouralternatives. Job performance is ______ by a number of factors. Motivation alone does not lead to increased performance. Ability and technology moderates the relationship
between motivation and performance. The higher the levels of ability and motivation the ______ the level of performance will be. However, increasing motivation
beyond an ______ level tends to ______ a dysfunctional result because it is ______ by an increased level of anxiety.
Job performance is ______ by a number of factors. Motivation alone
A pipe, working at full speed, can fill an empty cistern in 1 hour. However, during the first hour it worked at one-twelfth of its capacity, during the second hour at one-ninth of its capacity, during the third hour at one-sixth of its usual capacity and during the fifth hour it was only one -third as efficient as it was supposed to be. A second pipe also displayed similar performance, but if it worked at full speed would have filled the empty cistern in 2 hours. Together with a drain pipe that drained water out of the tank at a constant rate, the empty cistern could be filled in 5 hours, all the three pipes working concurrently. How many hours will it take the drain pipe to empty the filled cistern if no other pipe was functioning during the time?
Statement 1: All food additives are carcinogenic. Statement 2: Food additives must be avoided as far as possible.
Cloud point described in the oil and gas industry is the temperature (minimum), at which the lubricant under consideration coverts to semi solid and in fact the lubricant losses its flow properties.
The main function of the lubricant is to reduce the tensile or compressive stresses required in metal forming.
Consider the figures of a metal ball and a metal ring given below.
The metal ball can just pass through the hole of a metal ring formed out of a strip. When the ball is heated it gets stuck. But when the metal is heated
Heat and Thermodynamics mcq question image