Related Questions

A university library budget committee must reduce exactly five of eight areas of expenditure—I, J, K, L, M, N, O and P—in accordance with the following conditions: If both I and O are reduced, P is also reduced.
If L is reduced, neither N nor O is reduced.
If M is reduced, J is not reduced.
Of the three areas J, K, and N exactly two are reduced. Question : If both K and N are reduced, which one of the following is a pair of areas neither of which could be reduced?
An iron blast furnace produces hot metal containing 95% Fe. The iron ore charged into the furnace contains 95% Fe2O3 and the rest is gangue. Assume that all the iron in the ore goes to hot metal. The amount of iron ore (in kg) required for producing 1000 kg of hot metal is (Atomic weight of Fe = 56 g mol-1 and that of Fe2O3 = 160 g mol-1)
___________ is the field in which the nano particles are used with silica coated iron oxide iron oxide.
Out of the total production of iron from hematite, an ore of Iron, 20% of the ore gets wasted, and out of the remaining iron, only 25% is pure iron. If the pure iron obtained in a year from a mine of hematite was 80,000 kg, then the quantity of hematite mined from that mine in the year is
Which of the following statements are true with respect to iron ore?
I. Limestone and coal are important for smelting iron ore
II. More than 20% of the world iron ore deposits are in India
III. Odisha and Jharkhand top in the production of iron ore
IV. Iran is the largest buyer of Indian iron ore
Compared to mild steel, cast iron has
(i) High compressive strength
(ii) High tensile strength
(iii) Low compressive strength
(iv) Low tensile strength
In an iron thermit, how many moles of aluminium reacts with three moles of iron oxide to give nine moles of iron?
Estimation of total iron in oxide ore comprises of three basic steps namely (i) extraction of iron into solution (ii) oxidation for volumetric analysis or precipitation for gravimetric analysis, and (iii) titration in volumetric analysis or ignition and weighting in gravimetric analysis. Which of the following concentrated acid is used for the first step i.e. extraction of iron into solution?
In an ideal blast furnace, the input and output are as follows:
Input:
Ore, Pure Fe2O3, no gaunge : 1357kg/THM∗
Coke, Pure C, no ash : 400 kg/THM
Blast air, dry : O2 : 293 kg/HTM, N2 : 964 KG/THM
Flux : nil
Output :
Hot metal : 5wt% C, rest iron
Slag : nil
Top gas : CO, CO2, N2
∗ THM refers ton of hot metal (liquid pig iron) ; Atomic weights: C-12, O-16, Fe-56 The amount of oxygen in CO & CO2 leaving with the top gas is . . . . . . . . kg.
A metal oxide is reduced by heating it in a stream of hydrogen. After complete reduction, it is found that 3.15 gm of the oxide has yielded 1.05 gm of the metal. It may be inferred that the